

A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 12 V and at this voltage it achieves a speed of 68 RPM and a maximum torque of 1.4 kg * cm, consuming a current from 0.055 A to 0.58 A.
The recommended supply voltage for the motors is 12 V, but the motors operate without problems in the range from 9 V to 15 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
All N20W engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
![]() |
Dimensions of N20W micromotors (units in mm). |
---|
Our offer includes N20W engines with gear ratios from 50: 1 to 200: 1.
Gear ratio |
Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
50:1 | MP | 12 V | 381 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
150:1 | MP | 12 V | 136 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
200:1 | MP | 12 V | 68 RPM | 1,5 kg*cm | 55 mA | 0,58 A | LINK |
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
![]() |
![]() |
![]() |
Pololu 32x7mm wheels (black) | Pololu 32x7mm wheels (white) | Pololu 40x7mm wheels (red) |
![]() |
A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black |
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
![]() |
![]() |
![]() |
DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
![]() |
![]() |
![]() |
Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Pololu 3060
No product available!
Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 200 RPM, operating voltage 6 V. GA1036-N20M-0056
No product available!
1000:1 Micro Metal Gearmotor
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Small metal gear motor, 50 RPM speed, 3V operating voltage. GA12-N20-0001
No product available!
100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
Small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 85 RPM, maximum torque of 5 kg * cm, carbon brushes and double-sided shaft. Pololu 4797
No product available!
A small medium-power motor with a 1000: 1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 22 RPM, a maximum torque of 6.5 kg * cm and a double-sided shaft. Pololu 3059
No product available!
Small metal gear motor, 500 RPM speed, 12V operating voltage. GA12-N20-0026
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
A small, high-power motor with a 380: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 85 RPM, a maximum torque of 5 kg * cm and carbon brushes with increased durability. Pololu 4798
No product available!
Small metal gear motor, 20 RPM speed, 6V operating voltage. GA12-N20-0010
Small metal gear motor, 30 RPM speed, 6V operating voltage. GA12-N20-0011
No product available!
15:1 Micro Metal Gearmotor. Pololu 4782
Small metal gear motor, rotation speed 68 RPM, operating voltage 12 V. GA1218-N20W-0039