15:1 Micro Metal Gearmotor LP 6V with Extended Motor Shaft
ID: 577686
zł132.18
Tax included
zł107.46 tax excl.
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft
Description
Pololu DC motor equipped with a metal gearing with a gear ratio of 15.25: 1. The motor of the set is used for 6 V power supply and generates a torque of 0.17 kg * cm (0.017 Nm). Current absorbed by the motor without load to about 20 mA, then the maximum current absorbed under load to 360 mA. The motor has an extended shaft opposite the motor side, an encoder assembly or other shaft positioning must be attached for assembly. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of further parts of the drive system.
Features
- Nominal comparison of engine operation: 6 V
- Nominal unloaded motor current: 20 mA
- Nominal loaded motor current: 360 mA
- Nominal engine speed at 6V: 860 rpm
- Metal gear with a gear ratio of 15.25: 1
- Dimensions: 10 x 12 x 26 mm
- Weight: 9.5 g
577686
Data sheet
- DC motor power
- LP
- Gear material
- Metal
- Gear ratio
- 15,25:1
- Rotation speed
- 860
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł117.16
24h
Available quantity: 1
Available
Miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Pololu 3072
zł127.22
4 weeks
No product available!
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 6 V: 290 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.7 A at stall.
zł121.23
24h
Available quantity: 2
Available
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.31
24h
Available quantity: 2
Available
A small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 84 RPM and a maximum torque of 5.5 kg * cm. Pololu 4794
zł127.78
4 weeks
No product available!
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł58.88
24h
Available quantity: 3
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł87.91
24h
Available quantity: 2
Available
A small medium power motor with 210:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 100 RPM speed and a maximum torque of 1.7 kg*cm. Pololu 2369
zł127.99
4 weeks
No product available!
Small metal gear motor, 60 RPM speed, 3V operating voltage. GA12-N20-0004
zł21.01
24h
Available quantity: 5
Available
Small metal gear motor, 50 RPM speed, 12V operating voltage. GA12-N20-0021
zł20.84
24h
Available quantity: 6
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.28
24h
Available quantity: 1
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.31
24h
Available quantity: 1
Available
150:1 Micro Metal Gearmotor HP
zł113.31
24h
Available quantity: 1
Available
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 300 RPM, operating voltage 6 V. GA1036-N20M-0057
zł35.51
24h
Available quantity: 8
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł148.83
24h
Available quantity: 2
Available
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft