Pololu HPCB motor with gear 380:1 12V and double-sided shaft
ID: 579870
zł143.57
Tax included
zł116.72 tax excl.
Pololu high power miniature motor with carbon brushes. 380:1 gear motor, shaft speed 85 rpm, torque 5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 4799
Description
Pololu DC motor equipped with a 380:1 metal gear ratio. The motor of the set is designed for 12 V supply and generates a torque of 5 kg*cm. The current consumed by the loaded motor is about 60 mA, while the maximum current consumed under load is 750 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. In this set, the manufacturer used the HPCB series engine, which means that it is equipped with carbon brushes. It is much more durable than brushes made of metal plates used so far. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Features
- Nominal motor operating voltage: 12 V
- Nominal unloaded motor current: 60 mA
- Nominal load current: 750 mA
- Nominal engine speed at 12 V: 85 rpm
- Metal gear ratio: 380:1
- Double-sided shaft
- Dimensions: 10 x 12 x 26 mm
- Weight: 9.5 g
579870
Data sheet
- DC motor power
- HPCB
- Gear material
- Metal
- Gear ratio
- 380:1
- Rotation speed
- 85RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 12V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Small metal gear motor, 1000 RPM speed, 3V operating voltage. GA12-N20-0009
zł22.04
4 weeks
No product available!
Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789
zł159.04
24h
Available quantity: 1
Available
Small motor with metal gear and encoder, rotation speed 150 RPM, operating voltage 6 V. GA46-N20E-0046
zł38.65
4 weeks
No product available!
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł132.18
24h
Available quantity: 4
Available
Pololu high power miniature motor with carbon brushes. 100:1 gear motor, shaft speed is 330 rpm, torque 1.3 kg*cm. Pololu 3041
zł140.02
24h
Available quantity: 2
Available
Small motor with metal gear and encoder, rotation speed 30 RPM, operating voltage 6 V. GA46-N20E-0042
zł38.65
4 weeks
No product available!
50:1 Micro Metal Gearmotor with Extended Motor Shaft
zł117.15
4 weeks
No product available!
Pololu high power miniature motor with carbon brushes. 50:1 gear motor, shaft speed 420 rpm, torque 0,54kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2379
zł132.69
24h
Available quantity: 5
Available
100:1 Micro Metal Gearmotor with Extended Motor Shaft
zł117.15
24h
Available quantity: 2
Available
No product available!
A small, low-power motor with a 1000: 1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 13 RPM, maximum torque 5.5 kg * cm and double-sided shaft. Pololu 3058
zł193.15
4 weeks
No product available!
No product available!
Small metal gear motor, rotation speed 136 RPM, operating voltage 6 V. GA1024-N20F-0037
zł28.23
24h
Available quantity: 15
Available
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.27
24h
Available quantity: 3
Available
A small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A current consumption, 84 RPM, maximum torque 5.5 kg * cm and double-sided shaft. Pololu 4795
zł132.35
4 weeks
No product available!
Small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 85 RPM, maximum torque of 5 kg * cm, carbon brushes and double-sided shaft. Pololu 4797
zł143.59
4 weeks
No product available!
Pololu high power miniature motor with carbon brushes. 380:1 gear motor, shaft speed 85 rpm, torque 5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 4799