30:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
ID: 562768
zł127.22
Tax included
zł103.43 tax excl.
Miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Pololu 3072
Description
Key specs at 6 V: 1000 RPM and 120 mA with no load, 9 oz-in (0.6 kg-cm) and 1.6 A at stall.
These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.
Features
- Size: 10 × 12 × 26 mm (output shafts add 14 mm to the 26 mm length)
- Weight: 9.5 g
- Shaft diameter: 3 mm, D shaft
- Gear ratio: 29.86:1
- Free-run speed @ 6V: 1000 rpm
- Free-run current @ 6V: 120 mA
- Stall current @ 6V: 1600 mA
- Stall torque @ 6V: 9 oz·in
- Extended motor shaft?: YES
- Long-life carbon brushes?: YES
- Motor type: 1.6A stall @ 6V (HPCB 6V - carbon brush)
562768
Data sheet
- DC motor power
- HPCB
- Gear material
- Metal
- Gear ratio
- 30:1
- Rotation speed
- 1 100 RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Small metal gear motor, 15 RPM speed, 3V operating voltage. GA12-N20-0001
zł29.68
24h
Available quantity: 4
Available
A small medium-power motor with a 5:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 4400 RPM and a maximum torque of 0.06 kg * cm. Pololu 2362
zł127.99
4 weeks
No product available!
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł132.18
24h
Available quantity: 4
Available
Small metal gear motor, 20 RPM speed, 12V operating voltage. GA12-N20-0019
zł29.68
24h
Available quantity: 6
Available
A small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A current consumption, 84 RPM, maximum torque 5.5 kg * cm and double-sided shaft. Pololu 4795
zł132.35
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 500 RPM, operating voltage 6 V. GA46-N20E-0049
zł38.65
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 60 RPM, operating voltage 6 V. GA46-N20E-0044
zł41.91
4 weeks
No product available!
Small metal gear motor, 1000 RPM speed, 12V operating voltage. GA12-N20-0027
zł20.84
24h
Available quantity: 1
Available
Small, high power motor with 50:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 650 RPM, maximum torque 0.67 kg*cm, carbon brushes and double-sided shaft. Pololu 3050
zł143.59
4 weeks
No product available!
No product available!
No product available!
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł42.96
24h
Available quantity: 3
Available
Small metal gear motor, 50 RPM speed, 6V operating voltage. GA12-N20-0010
zł20.84
24h
Available quantity: 5
Available
Small metal gear motor, rotation speed 136 RPM, operating voltage 12 V. GA1218-N20W-0040
zł32.48
24h
Available quantity: 5
Available
Miniature high-power motor from the Pololu MP series. Gear motor 5: 1,
the rotational speed of the shaft is 4400 rpm, the torque is 0.1 kg * cm (0.01 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2376
zł117.16
4 weeks
No product available!
A high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
zł151.72
24h
Available quantity: 6
Available
Miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Pololu 3072