Pololu HPCB motor with gear 210:1 12V and double-sided shaft
ID: 579868
zł145.14
Tax included
zł118.00 tax excl.
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054
Description
Pololu DC motor equipped with a 210:1 metal gear ratio. The motor of the set is designed for 12 V supply and generates a torque of 2.5 kg*cm. The current consumed by the loaded motor is about 60 mA, while the maximum current consumed under load is 750 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. In this set, the manufacturer used the HPCB series engine, which means that it is equipped with carbon brushes. It is much more durable than brushes made of metal plates used so far. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Features
- Nominal motor operating voltage: 12 V
- Nominal unloaded motor current: 60 mA
- Nominal load current: 750 mA
- Nominal engine speed at 12 V: 160 rpm
- Metal gear ratio: 210:1
- Double-sided shaft
- Dimensions: 10 x 12 x 26 mm
- Weight: 9.5 g
579868
Data sheet
- DC motor power
- HPCB
- Gear material
- Metal
- Gear ratio
- 210:1
- Rotation speed
- 160RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 12V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
No product available!
75:1 Micro Metal Gearmotor HP
zł129.90
24h
Available quantity: 1
Available
No product available!
Small, high power motor with 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm, carbon brushes and double-sided shaft. Pololu 3055
zł143.57
4 weeks
No product available!
Small metal gear motor, 300 RPM speed, 6V operating voltage. GA12-N20-0016
zł20.84
4 weeks
No product available!
Small metal gear motor, 30 RPM speed, 3V operating voltage. GA12-N20-0001
zł29.68
24h
Available quantity: 2
Available
10:1 Micro Metal Gearmotor
zł105.52
24h
Available quantity: 1
Available
Small metal gear motor, 500 RPM speed, 3V operating voltage. GA12-N20-0008
zł26.74
24h
Available quantity: 6
Available
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł132.18
24h
Available quantity: 4
Available
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 30 RPM, operating voltage 6 V. GA1036-N20M-0052
zł28.60
24h
Available quantity: 3
Available
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł121.38
4 weeks
No product available!
A small medium-power motor with a 1000: 1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 22 RPM, a maximum torque of 6.5 kg * cm and a double-sided shaft. Pololu 3059
zł193.15
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Pololu 3064
zł130.45
24h
Available quantity: 1
Available
15:1 Micro Metal Gearmotor. Pololu 4784
zł132.50
24h
Available quantity: 14
Available
Small metal gear motor, 30 RPM speed, 12V operating voltage. GA12-N20-0020
zł29.68
24h
Available quantity: 3
Available
No product available!
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054