Pololu HPCB motor with gear 75:1 12V and double-sided shaft
ID: 579866
zł143.57
Tax included
zł116.72 tax excl.
Pololu high power miniature motor with carbon brushes. 75:1 gear motor, shaft speed 450 rpm, torque 1kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3051
Description
Pololu DC motor equipped with a 75:1 metal gear ratio. The motor of the set is designed for 12 V supply and generates a torque of 1 kg*cm. The current consumed by the loaded motor is about 60 mA, while the maximum current consumed under load is 750 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. In this set, the manufacturer used the HPCB series engine, which means that it is equipped with carbon brushes. It is much more durable than brushes made of metal plates used so far. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Features
- Nominal motor operating voltage: 12 V
- Nominal unloaded motor current: 60 mA
- Nominal load current: 750 mA
- Nominal engine speed at 12 V: 450 rpm
- Metal gear ratio: 75:1
- Double-sided shaft
- Dimensions: 10 x 12 x 26 mm
- Weight: 9.5 g
579866
Data sheet
- DC motor power
- HPCB
- Gear material
- Metal
- Gear ratio
- 75:1
- Rotation speed
- 450RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 12V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
250:1 Micro Metal Gearmotor
zł109.03
24h
Available quantity: 1
Available
Small, high power motor with 1000: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 35 RPM, maximum torque of 10 kg * cm, carbon brushes with increased strength and double-sided shaft. Pololu 3057
zł202.10
4 weeks
No product available!
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł117.15
24h
Available quantity: 1
Available
Pololu high power miniature motor with carbon brushes. 380:1 gear motor, shaft speed 85 rpm, torque 5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 4799
zł143.57
24h
Available quantity: 4
Available
Small, high power motor with 5: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 6800 RPM, maximum torque of 0.09 kg * cm, carbon brushes and double-sided shaft. Pololu 3047
zł143.65
4 weeks
No product available!
No product available!
A small medium-power motor with a 30:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 720 RPM, a maximum torque of 0.33 kg*cm and a double-sided shaft. Pololu 2378
zł132.38
4 weeks
No product available!
100:1 Micro Metal Gearmotor MP
zł113.25
24h
Available quantity: 2
Available
No product available!
Small metal gear motor, 1000 RPM speed, 6V operating voltage. GA12-N20-0018
zł16.72
4 weeks
No product available!
Pololu high power miniature motor with carbon brushes. 50:1 gear motor, shaft speed 420 rpm, torque 0,54kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2379
zł132.69
24h
Available quantity: 5
Available
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.18
24h
Available quantity: 2
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł183.38
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.31
24h
Available quantity: 2
Available
A small medium-power motor with a 5:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 4400 RPM and a maximum torque of 0.06 kg * cm. Pololu 2362
zł127.99
4 weeks
No product available!
Pololu high power miniature motor with carbon brushes. 75:1 gear motor, shaft speed 450 rpm, torque 1kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3051