Pololu HPCB motor with gear 50:1 6V and double-sided shaft
ID: 579886
zł132.69
Tax included
zł107.88 tax excl.
Pololu high power miniature motor with carbon brushes. 50:1 gear motor, shaft speed 420 rpm, torque 0,54kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2379
Description
Pololu DC motor equipped with a 50:1 metal gear ratio. The motor of the set is designed for 6 V supply and generates a torque of 0,54 kg*cm. The current consumed by the loaded motor is about 40 mA, while the maximum current consumed under load is 670 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. In this set, the manufacturer used the HPCB series engine, which means that it is equipped with carbon brushes. It is much more durable than brushes made of metal plates used so far. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Features
- Nominal motor operating voltage: 6 V
- Nominal unloaded motor current: 40 mA
- Nominal load current: 670 mA
- Nominal engine speed at 6 V: 420 rpm
- Metal gear ratio: 50:1
- Double-sided shaft
- Dimensions: 10 x 12 x 26 mm
- Weight: 9.5 g
579886
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 50:1
- Rotation speed
- 420RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Small metal gear motor, 60 RPM speed, 6V operating voltage. GA12-N20-0013
zł20.84
24h
Available quantity: 6
Available
Miniature, 6V brush DC motor with metal gear with 15,25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 10 mm and a diameter of 3 mm. Pololu 4787
zł143.53
24h
Available quantity: 5
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł182.89
4 weeks
No product available!
Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384
zł132.23
24h
Available quantity: 1
Available
Small, high power motor with 50:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 650 RPM, maximum torque 0.67 kg*cm, carbon brushes and double-sided shaft. Pololu 3050
zł143.59
4 weeks
No product available!
30:1 Micro Metal Gearmotor
zł109.06
24h
Available quantity: 1
Available
A small, powerful motor with 210: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, 160 RPM, maximum torque of 2.5 kg * cm and carbon brushes with increased durability. Pololu 3043
zł139.15
4 weeks
No product available!
A small, high power motor with a 50: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 650 RPM speed, maximum torque of 0.67 kg * cm and carbon brushes with increased durability. Pololu 3039
zł139.15
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 2000 RPM, operating voltage 6 V. GA46-N20E-0051
zł41.77
4 weeks
No product available!
No product available!
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
zł158.19
4 weeks
No product available!
Small metal gear motor, 60 RPM speed, 12V operating voltage. GA12-N20-0022
zł20.84
24h
Available quantity: 5
Available
Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783
zł132.18
24h
Available quantity: 3
Available
A small, high-power motor with a 1000: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 35 RPM, a maximum torque of 10 kg * cm and carbon brushes with increased durability. Pololu 3046
zł197.57
4 weeks
No product available!
Small metal gear motor, 30 RPM speed, 6V operating voltage. GA12-N20-0011
zł29.68
24h
Available quantity: 6
Available
A small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 84 RPM and a maximum torque of 5.5 kg * cm. Pololu 4794
zł127.78
4 weeks
No product available!
Pololu high power miniature motor with carbon brushes. 50:1 gear motor, shaft speed 420 rpm, torque 0,54kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2379