zł95.25 tax excl.
Miniature high-power motor from the Pololu MP series. Gear motor 5: 1, 
the rotational speed of the shaft is 4400 rpm, the torque is 0.1 kg * cm (0.01 Nm). 
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2376
The Pololu DC motor is equipped with a 5: 1 ratio metal transmission. The motor of the set is designed for supplying 6 V and generates a torque of 0.1 kg * cm (0.01 Nm). The current consumed by the unloaded motor is about 40 mA, while the maximum current drawn under the load is 700 mA. The motor has an extended shaft on the opposite side of the motor, allowing easy mounting of the encoder or other shaft position sensor. In this set, the manufacturer used the MP series motor, which means that it is equipped with classic brushes made of plaques. An alternative is the HPCB series of motors and gearboxes, which are equipped with carbon brushes. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the assembly of the further part of the drive system.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
100:1 Micro Metal Gearmotor with Extended Motor Shaft
Small metal gear motor, rotation speed 381 RPM, operating voltage 12 V. GA1218-N20W-0041
 No product available!
Small metal gear motor, 50 RPM speed, 6V operating voltage. GA12-N20-0010
A high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 60 RPM, operating voltage 6 V. GA1036-N20M-0054
A small, high power motor with a 250:1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 120 RPM, maximum torque of 3.4 kg*cm and a double-sided shaft. Pololu 2217
 No product available!
Small metal gear motor, 30 RPM speed, 6V operating voltage. GA12-N20-0011
A small, powerful motor with a 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm and carbon brushes with increased durability. Pololu 3044
 No product available!
A small low-power motor with a 250:1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 54 RPM, a maximum torque of 1.7 kg*cm and a double-sided shaft. Pololu 2207
 No product available!
Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783
 No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Pololu 3060
 No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 50 RPM, operating voltage 6 V. GA1036-N20M-0053
 No product available!
 No product available!
Small motor with metal gear and encoder, rotation speed 2000 RPM, operating voltage 6 V. GA46-N20E-0051
 No product available!
                    Miniature high-power motor from the Pololu MP series. Gear motor 5: 1, 
the rotational speed of the shaft is 4400 rpm, the torque is 0.1 kg * cm (0.01 Nm). 
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2376