

Pololu DC motor equipped with a metal gear with a gear ratio of 15.25: 1. The motor of the set is designed for 6 V supply and generates a torque of 0.2 kg * cm (0.02 Nm). The current consumed by the loaded motor is about 40 mA, while the maximum current consumed under load is 670 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
75:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
Small metal gear motor, 200 RPM speed, 6V operating voltage. GA12-N20-0015
30:1 Micro Metal Gearmotor with Extended Motor Shaft
No product available!
Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384
A small medium-power motor with a 30:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 720 RPM, a maximum torque of 0.33 kg*cm and a double-sided shaft. Pololu 2378
No product available!
30:1 Micro Metal Gearmotor
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 150 rpm, torque 1,3kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2382
No product available!
A small, powerful motor with a 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm and carbon brushes with increased durability. Pololu 3044
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 60 RPM, operating voltage 6 V. GA1036-N20M-0054
30:1 Micro Metal Gearmotor HP with Extended Motor Shaft
Small metal gear motor, rotation speed 381 RPM, operating voltage 6 V. GA1024-N20F-0038
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Small metal gear motor, 200 RPM speed, 12V operating voltage. GA12-N20-0024
A small, low-power motor with a 5:1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 2500 RPM speed and a maximum torque of 0.05 kg * cm. Pololu 1100
1000:1 Micro Metal Gearmotor HP
Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783