New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
1000RPM 6V N20 - miniature gearmotor
ID: 582302
5906623459452
zł16.72
Tax included
zł13.59 tax excl.
Small metal gear motor, 1000 RPM speed, 6V operating voltage. GA12-N20-0018
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it reaches a speed of 1000 RPM and a maximum torque of 0,11 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Engine type: medium power (MP)
- Gear ratio : 15:1
- Supply voltage: 3-9 V
- Speed: 1000 RPM
- Maximum torque: 0,11 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
Recommended supply voltage for motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20 motors have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 10 g.
 |
| Dimensions of N20 micromotors (units in mm). |
|---|
Types and parameters of N20 engines:
Our offer includes N20 motors with gear ratios from 15: 1 to 380: 1, in versions with a supply voltage of 3 V, 6 V or 12 V.
| Gear ratio | Type | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 15:1 | MP | 12 V | 1000 RPM | 0,13 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 1000 RPM | 0,11 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 1000 RPM | 0,09 kg*cm | 35 mA | 0,29 A | LINK | ||
| 30:1 | MP | 12 V | 500 RPM | 0,26 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 500 RPM | 0,22 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 500 RPM | 0,18 kg*cm | 35 mA | 0,29 A | LINK | ||
| 50:1 | MP | 12 V | 300 RPM | 0,43 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 300 RPM | 0,36 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 300 RPM | 0,30 kg*cm | 35 mA | 0,29 A | LINK | ||
| 100:1 | MP | 12 V | 200 RPM | 0,9 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 200 RPM | 0,7 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 200 RPM | 0,6 kg*cm | 35 mA | 0,29 A | LINK | ||
| 150:1 | MP | 12 V | 100 RPM | 1,3 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 100 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 100 RPM | 0,9 kg*cm | 35 mA | 0,29 A | LINK | ||
| 200:1 | MP | 12 V | 60 RPM | 1,7 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 60 RPM | 1,4 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 60 RPM | 1,2 kg*cm | 35 mA | 0,29 A | LINK | ||
| 250:1 | MP | 12 V | 50 RPM | 2,1 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 50 RPM | 1,8 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 50 RPM | 1,5 kg*cm | 35 mA | 0,29 A | LINK | ||
| 298:1 | MP | 12 V | 30 RPM | 2,4 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 30 RPM | 2,0 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 30 RPM | 1,7 kg*cm | 35 mA | 0,29 A | LINK | ||
| 380:1 | MP | 12 V | 20 RPM | 3,0 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 20 RPM | 2,5 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 15 RPM | 2,1 kg*cm | 35 mA | 0,29 A | LINK |
Wheels
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
 |
 |
 |
| Pololu 32x7mm wheels (black) | Pololu 32x7mm wheels (white) | Pololu 40x7mm wheels (red) |
 |
| A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black |
Tracks
The silicone tracks to match the Pololu miniature motors are available in two lengths: 22T (48mm) and 30T (85mm) and three colors: white, black and red.
 |
 |
 |
| Pololu 22T track set (black) | Pololu 22T track set (red) | Pololu 30T track set (white) |
Brackets
Specially designed brackets matching the miniature Pololu engines will also work well when mounting N20 engines. They are available in two colors: white and black, and in a standard and extended version.
 |
 |
 |
| Pololu Miniature Motor Bracket (Black) | Pololu Miniature Motor Bracket Pololu (White) | Pololu Miniature Motor Bracket extended (White) |
Motors drivers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582302
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 15,25:1
- Rotation speed
- 1000RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A small, low-power motor with a 1000: 1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 13 RPM, maximum torque 5.5 kg * cm and double-sided shaft. Pololu 3058
zł193.15
4 weeks
No product available!
No product available!
Small, high power motor with 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm, carbon brushes and double-sided shaft. Pololu 3055
zł143.57
4 weeks
No product available!
Small metal gear motor, 100 RPM speed, 12V operating voltage. GA12-N20-0023
zł22.72
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł148.83
24h
Available quantity: 2
Available
Miniature high-power motor from the Pololu MP series. The 210: 1 gear motor, shaft speed is 100 rpm, the torque is 2.6 kg * cm (0.26 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2383
zł117.16
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 2000 RPM, operating voltage 6 V. GA46-N20E-0051
zł41.77
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.19
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 30 RPM, operating voltage 6 V. GA46-N20E-0042
zł38.65
4 weeks
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 50 RPM, operating voltage 6 V. GA1036-N20M-0053
zł29.82
24h
Available quantity: 3
Available
150:1 Micro Metal Gearmotor HP
zł113.31
24h
Available quantity: 1
Available
Small motor with metal gear and encoder, rotation speed 1000 RPM, operating voltage 6 V. GA46-N20E-0050
zł41.77
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł132.38
24h
Available quantity: 4
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.18
24h
Available quantity: 1
Available
Small metal gear motor, 50 RPM speed, 3V operating voltage. GA12-N20-0001
zł19.56
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.27
24h
Available quantity: 3
Available
Small metal gear motor, 1000 RPM speed, 6V operating voltage. GA12-N20-0018