![20RPM 6V N20 - miniature gearmotor 20RPM 6V N20 - miniature gearmotor](https://kamami.pl/39307-large_default/20rpm-6v-n20-miniature-gearmotor.jpg)
![20RPM 6V N20 - miniature gearmotor 20RPM 6V N20 - miniature gearmotor](https://kamami.pl/39307-large_default/20rpm-6v-n20-miniature-gearmotor.jpg)
zł19.23 tax excl.
Small metal gear motor, 20 RPM speed, 6V operating voltage. GA12-N20-0010
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it reaches a speed of 20 RPM and a maximum torque of 2,5 kg * cm, consuming a current from 0.055 A to 0.58 A.
Recommended supply voltage for motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
All N20 motors have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 10 g.
![]() |
Dimensions of N20 micromotors (units in mm). |
---|
Our offer includes N20 motors with gear ratios from 15: 1 to 380: 1, in versions with a supply voltage of 3 V, 6 V or 12 V.
Gear ratio | Type | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
15:1 | MP | 12 V | 1000 RPM | 0,13 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 1000 RPM | 0,11 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 1000 RPM | 0,09 kg*cm | 35 mA | 0,29 A | LINK | ||
30:1 | MP | 12 V | 500 RPM | 0,26 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 500 RPM | 0,22 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 500 RPM | 0,18 kg*cm | 35 mA | 0,29 A | LINK | ||
50:1 | MP | 12 V | 300 RPM | 0,43 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 300 RPM | 0,36 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 300 RPM | 0,30 kg*cm | 35 mA | 0,29 A | LINK | ||
100:1 | MP | 12 V | 200 RPM | 0,9 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 200 RPM | 0,7 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 200 RPM | 0,6 kg*cm | 35 mA | 0,29 A | LINK | ||
150:1 | MP | 12 V | 100 RPM | 1,3 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 100 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 100 RPM | 0,9 kg*cm | 35 mA | 0,29 A | LINK | ||
200:1 | MP | 12 V | 60 RPM | 1,7 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 60 RPM | 1,4 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 60 RPM | 1,2 kg*cm | 35 mA | 0,29 A | LINK | ||
250:1 | MP | 12 V | 50 RPM | 2,1 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 50 RPM | 1,8 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 50 RPM | 1,5 kg*cm | 35 mA | 0,29 A | LINK | ||
298:1 | MP | 12 V | 30 RPM | 2,4 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 30 RPM | 2,0 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 30 RPM | 1,7 kg*cm | 35 mA | 0,29 A | LINK | ||
380:1 | MP | 12 V | 20 RPM | 3,0 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 20 RPM | 2,5 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 15 RPM | 2,1 kg*cm | 35 mA | 0,29 A | LINK |
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
![]() |
A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black |
The silicone tracks to match the Pololu miniature motors are available in two lengths: 22T (48mm) and 30T (85mm) and three colors: white, black and red.
Specially designed brackets matching the miniature Pololu engines will also work well when mounting N20 engines. They are available in two colors: white and black, and in a standard and extended version.
![]() |
![]() |
![]() |
Pololu Miniature Motor Bracket (Black) | Pololu Miniature Motor Bracket Pololu (White) | Pololu Miniature Motor Bracket extended (White) |
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
![]() |
![]() |
![]() |
DC motor controller with DRV8838 Pololu | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with DRV8835 chip |
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Small metal gear motor, 30 RPM speed, 12V operating voltage. GA12-N20-0020
No product available!
A small, high-power motor with a 380: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 85 RPM, a maximum torque of 5 kg * cm and carbon brushes with increased durability. Pololu 4796
No product available!
30:1 Micro Metal Gearmotor with Extended Motor Shaft
No product available!
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
A small low-power motor with a 250:1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 54 RPM, a maximum torque of 1.7 kg*cm and a double-sided shaft. Pololu 2207
No product available!
A small, high-power motor with a 50: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 650 RPM, a maximum torque of 0.74 kg * cm and carbon brushes with increased durability. Pololu 3063
No product available!
1000:1 Micro Metal Gearmotor HP
A small medium-power motor with a 250:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 88 RPM speed and a maximum torque of 2.2 kg*cm. Pololu 2370
No product available!
A small, high-power motor with a 250: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 130 RPM, a maximum torque of 3.2 kg * cm and carbon brushes with increased durability. Pololu 3068
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Small metal gear motor, 60 RPM speed, 6V operating voltage. GA12-N20-0013
No product available!
75:1 Micro Metal Gearmotor HP
A small, high power motor with a 50: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 650 RPM speed, maximum torque of 0.67 kg * cm and carbon brushes with increased durability. Pololu 3039
No product available!
A small, low-power motor with a 380: 1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 36 RPM speed, maximum torque of 2.9 kg * cm and double-sided shaft. Pololu 4791
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Small metal gear motor, 20 RPM speed, 6V operating voltage. GA12-N20-0010