![100RPM 6V N20 - miniature gearmotor 100RPM 6V N20 - miniature gearmotor](https://kamami.pl/39311-large_default/100rpm-6v-n20-miniature-gearmotor.jpg)
![100RPM 6V N20 - miniature gearmotor 100RPM 6V N20 - miniature gearmotor](https://kamami.pl/39311-large_default/100rpm-6v-n20-miniature-gearmotor.jpg)
zł16.34 tax excl.
Small metal gear motor, 100 RPM speed, 6V operating voltage. GA12-N20-0014
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it reaches a speed of 100 RPM and a maximum torque of 1,1 kg * cm, consuming a current from 0.055 A to 0.58 A.
Recommended supply voltage for motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
All N20 motors have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 10 g.
![]() |
Dimensions of N20 micromotors (units in mm). |
---|
Our offer includes N20 motors with gear ratios from 15: 1 to 380: 1, in versions with a supply voltage of 3 V, 6 V or 12 V.
Gear ratio | Type | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
15:1 | MP | 12 V | 1000 RPM | 0,13 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 1000 RPM | 0,11 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 1000 RPM | 0,09 kg*cm | 35 mA | 0,29 A | LINK | ||
30:1 | MP | 12 V | 500 RPM | 0,26 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 500 RPM | 0,22 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 500 RPM | 0,18 kg*cm | 35 mA | 0,29 A | LINK | ||
50:1 | MP | 12 V | 300 RPM | 0,43 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 300 RPM | 0,36 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 300 RPM | 0,30 kg*cm | 35 mA | 0,29 A | LINK | ||
100:1 | MP | 12 V | 200 RPM | 0,9 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 200 RPM | 0,7 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 200 RPM | 0,6 kg*cm | 35 mA | 0,29 A | LINK | ||
150:1 | MP | 12 V | 100 RPM | 1,3 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 100 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 100 RPM | 0,9 kg*cm | 35 mA | 0,29 A | LINK | ||
200:1 | MP | 12 V | 60 RPM | 1,7 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 60 RPM | 1,4 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 60 RPM | 1,2 kg*cm | 35 mA | 0,29 A | LINK | ||
250:1 | MP | 12 V | 50 RPM | 2,1 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 50 RPM | 1,8 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 50 RPM | 1,5 kg*cm | 35 mA | 0,29 A | LINK | ||
298:1 | MP | 12 V | 30 RPM | 2,4 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 30 RPM | 2,0 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 30 RPM | 1,7 kg*cm | 35 mA | 0,29 A | LINK | ||
380:1 | MP | 12 V | 20 RPM | 3,0 kg*cm | 70 mA | 0,82 A | LINK |
6 V | 20 RPM | 2,5 kg*cm | 55 mA | 0,58 A | LINK | ||
3 V | 15 RPM | 2,1 kg*cm | 35 mA | 0,29 A | LINK |
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
![]() |
A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black |
The silicone tracks to match the Pololu miniature motors are available in two lengths: 22T (48mm) and 30T (85mm) and three colors: white, black and red.
Specially designed brackets matching the miniature Pololu engines will also work well when mounting N20 engines. They are available in two colors: white and black, and in a standard and extended version.
![]() |
![]() |
![]() |
Pololu Miniature Motor Bracket (Black) | Pololu Miniature Motor Bracket Pololu (White) | Pololu Miniature Motor Bracket extended (White) |
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
![]() |
![]() |
![]() |
DC motor controller with DRV8838 Pololu | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with DRV8835 chip |
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
15:1 Micro Metal Gearmotor. Pololu 4782
30:1 Micro Metal Gearmotor HP with Extended Motor Shaft
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 6 V: 290 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.7 A at stall.
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
No product available!
Small metal gear motor, 60 RPM speed, 12V operating voltage. GA12-N20-0022
No product available!
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
A small, powerful motor with a 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm and carbon brushes with increased durability. Pololu 3044
No product available!
No product available!
Small metal gear motor, 15 RPM speed, 3V operating voltage. GA12-N20-0001
No product available!
No product available!
Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384
A small medium-power engine with a 380: 1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 57 RPM, maximum torque of 3.6 kg * cm and double-sided shaft. Pololu 4793
No product available!
A small, powerful motor with 5: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 6800 RPM, maximum torque of 0.09 kg * cm and carbon brushes for extra durability. Pololu 3036
No product available!
Miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Pololu 3072
No product available!
Small metal gear motor, 100 RPM speed, 6V operating voltage. GA12-N20-0014