100RPM 6V N20 - miniature gearmotor
ID: 582298
5906623474219
zł20.10
Tax included
zł16.34 tax excl.
Small metal gear motor, 100 RPM speed, 6V operating voltage. GA12-N20-0014
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it reaches a speed of 100 RPM and a maximum torque of 1,1 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Engine type: medium power (MP)
- Gear ratio : 150:1
- Supply voltage: 3-9 V
- Speed: 100 RPM
- Maximum torque: 1,1 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
Recommended supply voltage for motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20 motors have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 10 g.
 |
| Dimensions of N20 micromotors (units in mm). |
|---|
Types and parameters of N20 engines:
Our offer includes N20 motors with gear ratios from 15: 1 to 380: 1, in versions with a supply voltage of 3 V, 6 V or 12 V.
| Gear ratio | Type | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 15:1 | MP | 12 V | 1000 RPM | 0,13 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 1000 RPM | 0,11 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 1000 RPM | 0,09 kg*cm | 35 mA | 0,29 A | LINK | ||
| 30:1 | MP | 12 V | 500 RPM | 0,26 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 500 RPM | 0,22 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 500 RPM | 0,18 kg*cm | 35 mA | 0,29 A | LINK | ||
| 50:1 | MP | 12 V | 300 RPM | 0,43 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 300 RPM | 0,36 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 300 RPM | 0,30 kg*cm | 35 mA | 0,29 A | LINK | ||
| 100:1 | MP | 12 V | 200 RPM | 0,9 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 200 RPM | 0,7 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 200 RPM | 0,6 kg*cm | 35 mA | 0,29 A | LINK | ||
| 150:1 | MP | 12 V | 100 RPM | 1,3 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 100 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 100 RPM | 0,9 kg*cm | 35 mA | 0,29 A | LINK | ||
| 200:1 | MP | 12 V | 60 RPM | 1,7 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 60 RPM | 1,4 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 60 RPM | 1,2 kg*cm | 35 mA | 0,29 A | LINK | ||
| 250:1 | MP | 12 V | 50 RPM | 2,1 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 50 RPM | 1,8 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 50 RPM | 1,5 kg*cm | 35 mA | 0,29 A | LINK | ||
| 298:1 | MP | 12 V | 30 RPM | 2,4 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 30 RPM | 2,0 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 30 RPM | 1,7 kg*cm | 35 mA | 0,29 A | LINK | ||
| 380:1 | MP | 12 V | 20 RPM | 3,0 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 20 RPM | 2,5 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 15 RPM | 2,1 kg*cm | 35 mA | 0,29 A | LINK |
Wheels
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
 |
 |
 |
| Pololu 32x7mm wheels (black) | Pololu 32x7mm wheels (white) | Pololu 40x7mm wheels (red) |
 |
| A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black |
Tracks
The silicone tracks to match the Pololu miniature motors are available in two lengths: 22T (48mm) and 30T (85mm) and three colors: white, black and red.
 |
 |
 |
| Pololu 22T track set (black) | Pololu 22T track set (red) | Pololu 30T track set (white) |
Brackets
Specially designed brackets matching the miniature Pololu engines will also work well when mounting N20 engines. They are available in two colors: white and black, and in a standard and extended version.
 |
 |
 |
| Pololu Miniature Motor Bracket (Black) | Pololu Miniature Motor Bracket Pololu (White) | Pololu Miniature Motor Bracket extended (White) |
Motors drivers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582298
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 150:1
- Rotation speed
- 100RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Other products in the same category (16)
A small, high power motor with a 250:1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 120 RPM, maximum torque of 3.4 kg*cm and a double-sided shaft. Pololu 2217
zł101.66
6 weeks
No product available!
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł100.92
24h
Available quantity: 2
Available
A small, high-power motor with a 1000: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 35 RPM, a maximum torque of 10 kg * cm and carbon brushes with increased durability. Pololu 3046
zł150.28
6 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 500 RPM, operating voltage 6 V. GA46-N20E-0049
zł38.65
24h
Available quantity: 7
Available
Small, high power motor with 298:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 110 RPM, maximum torque 3.3 kg*cm and carbon brushes for extra durability. Pololu 3045
zł108.97
6 weeks
No product available!
Small metal gear motor, 500 RPM speed, 3V operating voltage. GA12-N20-0008
zł22.99
24h
Available quantity: 5
Available
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
zł123.87
24h
Available quantity: 4
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł140.36
6 weeks
No product available!
A small low-power motor with a 250:1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 54 RPM, a maximum torque of 1.7 kg*cm and a double-sided shaft. Pololu 2207
zł101.66
6 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 1000 RPM, operating voltage 6 V. GA46-N20E-0050
zł41.77
24h
Available quantity: 1
Available
Small metal gear motor, 500 RPM speed, 12V operating voltage. GA12-N20-0026
zł22.72
24h
Available quantity: 4
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł99.85
24h
Available quantity: 4
Available
Miniature high-power motor from the Pololu MP series. Gear motor 5: 1,
the rotational speed of the shaft is 4400 rpm, the torque is 0.1 kg * cm (0.01 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2376
zł89.99
6 weeks
No product available!
15:1 Micro Metal Gearmotor. Pololu 4782
zł96.78
24h
Available quantity: 4
Available
A small, low-power motor with a 5:1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 2500 RPM, maximum torque of 0.05 kg*cm and double-sided shaft. Pololu 2200
zł101.91
6 weeks
No product available!
Small metal gear motor, 100 RPM speed, 6V operating voltage. GA12-N20-0014