 
        
           
        
          Pololu DC motor equipped with a 15,25:1 metal gear ratio. The motor is designed for 12 V power supply and generates a torque of 0.25 kg*cm. The current consumed by the loaded motor is about 70 mA, while the maximum current consumed under load is 1600 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. The transmission has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
Small metal gear motor, 30 RPM speed, 3V operating voltage. GA12-N20-0001
A small, low-power motor with a 1000: 1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 13 RPM, maximum torque 5.5 kg * cm and double-sided shaft. Pololu 3058
 No product available!
A high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 220 rpm, torque 1,8kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3053
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054
 No product available!
Miniature MP electric motor (6 VDC / 40 mA) in a metal casing with a 30: 1 gearbox, with a half shaft D with a diameter of 3 mm.
 No product available!
Small metal gear motor, 15 RPM speed, 3V operating voltage. GA12-N20-0001
Small metal gear motor, 500 RPM speed, 6V operating voltage. GA12-N20-0010
 No product available!
Small metal gear motor, rotation speed 136 RPM, operating voltage 12 V. GA1218-N20W-0040
30:1 Micro Metal Gearmotor HP with Extended Motor Shaft
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
 No product available!
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
 
                    Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788