

A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 68 RPM and a maximum torque of 1.4 kg * cm, consuming a current from 0.055 A to 0.58 A.
The recommended supply voltage for the motors is 3 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
All N20F engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
![]() |
Dimensions of N20F micromotors (units in mm). |
---|
Our offer includes N20F engines with gear ratios from 50: 1 to 200: 1.
Gear ratio |
Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
50:1 | MP | 6 V | 381 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
150:1 | MP | 6 V | 136 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
200:1 | MP | 6 V | 68 RPM | 1,5 kg*cm | 55 mA | 0,58 A | LINK |
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
![]() |
![]() |
![]() |
DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
![]() |
![]() |
![]() |
Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A small, powerful motor with 5:1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 6100 RPM, maximum torque of 0.11 kg*cm and double-sided shaft. Pololu 2210
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
No product available!
A small, high power motor with 210: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 160 RPM speed, maximum torque of 2.8 kg * cm and carbon brushes with increased durability. Pololu 3067
No product available!
298:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
Small motor with metal gear and encoder, rotation speed 100 RPM, operating voltage 6 V. GA46-N20E-0045
No product available!
A small, low-power motor with a 5:1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 2500 RPM speed and a maximum torque of 0.05 kg * cm. Pololu 1100
A small medium-power motor with a 5:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 4400 RPM and a maximum torque of 0.06 kg * cm. Pololu 2362
No product available!
250:1 Micro Metal Gearmotor
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
No product available!
Small, high power motor with 298:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 110 RPM, maximum torque 3.3 kg*cm and carbon brushes for extra durability. Pololu 3045
No product available!
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Small metal gear motor, 30 RPM speed, 6V operating voltage. GA12-N20-0011
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
A small, powerful motor with 210: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, 160 RPM, maximum torque of 2.5 kg * cm and carbon brushes with increased durability. Pololu 3043
No product available!
Small metal gear motor, rotation speed 68 RPM, operating voltage 6 V. GA1024-N20F-0036