New products
New products
zł609.00
Delivery date unknown
zł462.10
24h
Available
300RPM 6V N20 - miniature gearmotor
ID: 582300
5906623474233
zł22.72
Tax included
zł18.47 tax excl.
Small metal gear motor, 300 RPM speed, 6V operating voltage. GA12-N20-0016
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it reaches a speed of 300 RPM and a maximum torque of 0,36 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Engine type: medium power (MP)
- Gear ratio : 50:1
- Supply voltage: 3-9 V
- Speed: 300 RPM
- Maximum torque: 0,36 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
Recommended supply voltage for motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20 motors have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 10 g.
 |
| Dimensions of N20 micromotors (units in mm). |
|---|
Types and parameters of N20 engines:
Our offer includes N20 motors with gear ratios from 15: 1 to 380: 1, in versions with a supply voltage of 3 V, 6 V or 12 V.
| Gear ratio | Type | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 15:1 | MP | 12 V | 1000 RPM | 0,13 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 1000 RPM | 0,11 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 1000 RPM | 0,09 kg*cm | 35 mA | 0,29 A | LINK | ||
| 30:1 | MP | 12 V | 500 RPM | 0,26 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 500 RPM | 0,22 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 500 RPM | 0,18 kg*cm | 35 mA | 0,29 A | LINK | ||
| 50:1 | MP | 12 V | 300 RPM | 0,43 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 300 RPM | 0,36 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 300 RPM | 0,30 kg*cm | 35 mA | 0,29 A | LINK | ||
| 100:1 | MP | 12 V | 200 RPM | 0,9 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 200 RPM | 0,7 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 200 RPM | 0,6 kg*cm | 35 mA | 0,29 A | LINK | ||
| 150:1 | MP | 12 V | 100 RPM | 1,3 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 100 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 100 RPM | 0,9 kg*cm | 35 mA | 0,29 A | LINK | ||
| 200:1 | MP | 12 V | 60 RPM | 1,7 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 60 RPM | 1,4 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 60 RPM | 1,2 kg*cm | 35 mA | 0,29 A | LINK | ||
| 250:1 | MP | 12 V | 50 RPM | 2,1 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 50 RPM | 1,8 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 50 RPM | 1,5 kg*cm | 35 mA | 0,29 A | LINK | ||
| 298:1 | MP | 12 V | 30 RPM | 2,4 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 30 RPM | 2,0 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 30 RPM | 1,7 kg*cm | 35 mA | 0,29 A | LINK | ||
| 380:1 | MP | 12 V | 20 RPM | 3,0 kg*cm | 70 mA | 0,82 A | LINK |
| 6 V | 20 RPM | 2,5 kg*cm | 55 mA | 0,58 A | LINK | ||
| 3 V | 15 RPM | 2,1 kg*cm | 35 mA | 0,29 A | LINK |
Wheels
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
 |
 |
 |
| Pololu 32x7mm wheels (black) | Pololu 32x7mm wheels (white) | Pololu 40x7mm wheels (red) |
 |
| A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black |
Tracks
The silicone tracks to match the Pololu miniature motors are available in two lengths: 22T (48mm) and 30T (85mm) and three colors: white, black and red.
 |
 |
 |
| Pololu 22T track set (black) | Pololu 22T track set (red) | Pololu 30T track set (white) |
Brackets
Specially designed brackets matching the miniature Pololu engines will also work well when mounting N20 engines. They are available in two colors: white and black, and in a standard and extended version.
 |
 |
 |
| Pololu Miniature Motor Bracket (Black) | Pololu Miniature Motor Bracket Pololu (White) | Pololu Miniature Motor Bracket extended (White) |
Motors drivers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582300
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 50:1
- Rotation speed
- 300 RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Other products in the same category (16)
Small motor with metal gear and encoder, rotation speed 300 RPM, operating voltage 6 V. GA46-N20E-0048
zł38.65
6 weeks
No product available!
A small, powerful motor with 5:1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 6100 RPM, maximum torque of 0.11 kg*cm and double-sided shaft. Pololu 2210
zł101.66
6 weeks
No product available!
A small, low-power motor with a 10:1 metal gear, operating voltage of 6 V, power consumption from 0.02 A to 0.36 A, speed of 1300 RPM, maximum torque of 0.1 kg*cm and double-sided shaft. Pololu 2201
zł101.66
6 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Pololu 3064
zł102.15
24h
Available quantity: 1
Available
Small motor with metal gear and encoder, rotation speed 2000 RPM, operating voltage 6 V. GA46-N20E-0051
zł41.77
24h
Available quantity: 3
Available
Small metal gear motor, 30 RPM speed, 3V operating voltage. GA12-N20-0001
zł22.66
24h
Available quantity: 4
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł97.87
24h
Available quantity: 4
Available
A small, high power motor with 210: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 160 RPM speed, maximum torque of 2.8 kg * cm and carbon brushes with increased durability. Pololu 3067
zł108.97
6 weeks
No product available!
No product available!
A high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
zł103.68
24h
Available quantity: 6
Available
Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384
zł101.56
24h
Available quantity: 1
Available
A small, low-power motor with a 380: 1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 36 RPM speed, maximum torque of 2.9 kg * cm and double-sided shaft. Pololu 4791
zł101.66
6 weeks
No product available!
A small, low-power motor with a 150:1 metal gear, operating voltage of 6 V, power consumption from 0.02 A to 0.36 A, speed of 90 RPM, maximum torque of 1.1 kg*cm and double-sided shaft. Pololu 2205
zł101.66
6 weeks
No product available!
Small metal gear motor, 100 RPM speed, 3V operating voltage. GA12-N20-0005
zł19.80
24h
Available quantity: 6
Available
A small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A power consumption, 84 RPM and a maximum torque of 5.5 kg * cm. Pololu 4794
zł96.73
6 weeks
No product available!
30:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł103.52
6 weeks
No product available!
Small metal gear motor, 300 RPM speed, 6V operating voltage. GA12-N20-0016