zł98.56 tax excl.
Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381
The Pololu DC engine is equipped with a metal transmission with a ratio of 100: 1. The motor of the set is designed for supplying 6 V and generates a torque of 1.5 kg * cm (0.15 Nm). The current consumed by the unloaded motor is about 40 mA, while the maximum current drawn under the load is 700 mA. The motor has an extended shaft on the opposite side of the motor, allowing easy mounting of the encoder or other shaft position sensor. In this set, the manufacturer used the MP series motor, which means that it is equipped with classic brushes made of plaques. An alternative is the HPCB series of motors and gearboxes, which are equipped with carbon brushes. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the assembly of the further part of the drive system.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Small metal gear motor, rotation speed 68 RPM, operating voltage 12 V. GA1218-N20W-0039
No product available!
30:1 Micro Metal Gearmotor with Extended Motor Shaft
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Pololu 3060
No product available!
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Pololu high power miniature motor with carbon brushes. 100:1 gear motor, shaft speed is 330 rpm, torque 1.6 kg*cm (0.16 Nm). Pololu 3065
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
No product available!
Small metal gear motor, 200 RPM speed, 6V operating voltage. GA12-N20-0015
No product available!
298:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
Small metal gear motor, 300 RPM speed, 6V operating voltage. GA12-N20-0016
No product available!
A small, low-power motor with a 10:1 metal gear, operating voltage of 6 V, power consumption from 0.02 A to 0.36 A, speed of 1300 RPM, maximum torque of 0.1 kg*cm and double-sided shaft. Pololu 2201
No product available!
Small motor with metal gear and encoder, rotation speed 150 RPM, operating voltage 6 V. GA46-N20E-0046
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Pololu high power miniature motor with carbon brushes. 100:1 gear motor, shaft speed is 330 rpm, torque 1.3 kg*cm. Pololu 3041
Small metal gear motor, rotation speed 136 RPM, operating voltage 12 V. GA1218-N20W-0040
Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381