Gravity: DC Micro Metal Gear Motor - controller with DC Micro motor with metal gear 50:1
ID: 562273
5902186312258
zł88.67
Tax included
zł72.09 tax excl.
DC Micro motor module with metal gear with a gear ratio of 50:1. The motor is connected to the board containing the driver. DFRobot DFR0429
Description
DC Micro motor module with metal gear with a gear ratio of 50:1. The motor is connected to the board containing the driver, so the motor can be controlled via the Gravity connector directly by the microcontroller (no additional H-bridge required). The set is controlled by the PWM signal, analogically to the servo. The module is characterized by low current consumption (less than 1 mA in the absence of a control signal). The user manual with a sample program is available on the product Wiki page.
Features
- Metal gear 50:1
- No-load current: 40mA @ 6V
- Static current: <1mA (no PWM control signal input)
- Interface: 3-pin Gravity
- Signal resolution PPM: 1 us
- PPM signal pulse width range: 500 us to 2500 us
- Clockwise rotation pulse width range: 500us-1400us (max speed 500us)
- Stop pulse width range: 1400us-1600us
- Counterclockwise Rotation Pulse Width Range: 1600us-2500us (max speed 2500us)
- PWM frequency: 500 Hz
- Voltage: 3.5V to 8V
Kit contains
- DC Micro Metal Gear Motor w/Diver - 50:1
- Gravity 3-Pin cable
562273
Data sheet
- DC motor power
- Other
- Gear material
- Metal
- Gear ratio
- 50:1
- Rotation speed
- Inna
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 3,5 - 8 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.
zł79.85
Delivery date unknown
No product available!
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 15
Available
Available
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł41.32
24h
Available quantity: 3
Available
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł57.97
24h
Available quantity: 6
Available
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Arduino ABX00028
zł62.50
Delivery date unknown
No product available!
Board with nRF52840 microcontroller with Cortex M4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 and IMU LSM9DS1 module. Module with headers. Arduino ABX00034
zł179.00
24h
Available quantity: 15
Available
Board with SAMD21 microcontroller with Cortex M0+ core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Arduino ABX00027
zł129.00
24h
Available quantity: 8
Available
Other products in the same category (16)
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł148.83
24h
Available quantity: 2
Available
A small medium-power motor with a 250:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 88 RPM speed and a maximum torque of 2.2 kg*cm. Pololu 2370
zł127.99
4 weeks
No product available!
A small medium power motor with 210:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 100 RPM speed and a maximum torque of 1.7 kg*cm. Pololu 2369
zł127.99
4 weeks
No product available!
A high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
zł151.72
24h
Available quantity: 6
Available
15:1 Micro Metal Gearmotor. Pololu 4780
zł127.85
24h
Available quantity: 4
Available
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł132.18
24h
Available quantity: 4
Available
15:1 Micro Metal Gearmotor. Pololu 4782
zł127.85
24h
Available quantity: 4
Available
Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783
zł132.18
24h
Available quantity: 3
Available
15:1 Micro Metal Gearmotor. Pololu 4784
zł132.50
24h
Available quantity: 14
Available
Miniature, 6V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4785
zł145.95
24h
Available quantity: 4
Available
Miniature, 12V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4786
zł139.16
24h
Available quantity: 2
Available
Miniature, 6V brush DC motor with metal gear with 15,25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 10 mm and a diameter of 3 mm. Pololu 4787
zł143.53
24h
Available quantity: 5
Available
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
zł158.19
4 weeks
No product available!
Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789
zł159.04
24h
Available quantity: 1
Available
A small, powerful motor with 5: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 6800 RPM, maximum torque of 0.09 kg * cm and carbon brushes for extra durability. Pololu 3036
zł139.15
4 weeks
No product available!
A small, high-power motor with a 30:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 1100 RPM speed, maximum torque of 0.39 kg*cm and carbon brushes with increased durability. Pololu 3038
zł139.09
4 weeks
No product available!
DC Micro motor module with metal gear with a gear ratio of 50:1. The motor is connected to the board containing the driver. DFRobot DFR0429