Gravity: DC Micro Metal Gear Motor - controller with DC Micro motor with metal gear 75:1
ID: 562274
5902186312265
zł60.74
Tax included
zł49.38 tax excl.
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399
Description
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver, so the motor can be controlled via the Gravity connector directly by the microcontroller (no additional H-bridge required). The set is controlled by the PWM signal, analogically to the servo. The module is characterized by low current consumption (less than 1 mA in the absence of a control signal). The user manual with a sample program is available on the product Wiki page.
Features
- Metal gear 75:1
- No-load current: 40mA @ 6V
- Static current: <1mA (no PWM control signal input)
- Interface: 3-pin Gravity
- Signal resolution PPM: 1 us
- PPM signal pulse width range: 500 us to 2500 us
- Clockwise rotation pulse width range: 500us-1400us (max speed 500us)
- Stop pulse width range: 1400us-1600us
- Counterclockwise Rotation Pulse Width Range: 1600us-2500us (max speed 2500us)
- PWM frequency: 500 Hz
- Voltage: 3.5V to 8V
Kit contains
- DC Micro Metal Gear Motor w/Diver - 75:1
- Gravity 3-Pin cable
562274
Data sheet
- DC motor power
- Other
- Gear material
- Metal
- Gear ratio
- 75:1
- Rotation speed
- Inna
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 3,5 - 8 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.
zł79.85
24h
Available quantity: 4
Available
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Extension board for Arduino Nano and Uno, 14 GPIO lines, connectors with I2C and UART interface lines. The board also has a RESET button and a voltage stabilizer
zł6.26
24h
Available quantity: 19
Available
Available
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł42.96
24h
Available quantity: 3
Available
DC Micro motor module with metal gear with a gear ratio of 50:1. The motor is connected to the board containing the driver. DFRobot DFR0429
zł88.67
24h
Available quantity: 3
Available
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Arduino ABX00028
zł57.70
24h
Available quantity: 21
Available
Board with nRF52840 microcontroller with Cortex M4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 and IMU LSM9DS1 module. Module with headers. Arduino ABX00034
zł179.00
24h
Available quantity: 20
Available
Other products in the same category (16)
No product available!
Miniature high-power motor from the Pololu MP series. Gear motor 5: 1,
the rotational speed of the shaft is 4400 rpm, the torque is 0.1 kg * cm (0.01 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2376
zł117.16
4 weeks
No product available!
A small, high power motor with a 50: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 650 RPM speed, maximum torque of 0.67 kg * cm and carbon brushes with increased durability. Pololu 3039
zł139.15
4 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł125.90
24h
Available quantity: 2
Available
Small motor with metal gear and encoder, rotation speed 150 RPM, operating voltage 6 V. GA46-N20E-0046
zł38.65
4 weeks
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 60 RPM, operating voltage 6 V. GA1036-N20M-0054
zł28.60
24h
Available quantity: 6
Available
Small metal gear motor, 1000 RPM speed, 12V operating voltage. GA12-N20-0027
zł20.84
4 weeks
No product available!
A small medium-power motor with a 1000: 1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 22 RPM, a maximum torque of 6.5 kg * cm and a double-sided shaft. Pololu 3059
zł193.15
4 weeks
No product available!
A small medium-power motor with a 380: 1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 57 RPM and a maximum torque of 3.6 kg * cm. Pololu 4792
zł127.78
4 weeks
No product available!
Small, high power motor with 1000: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 35 RPM, maximum torque of 10 kg * cm, carbon brushes with increased strength and double-sided shaft. Pololu 3057
zł202.10
4 weeks
No product available!
Miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Pololu 3074
zł134.65
4 weeks
No product available!
Miniature, 6V brush DC motor with metal gear with 15,25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 10 mm and a diameter of 3 mm. Pololu 4787
zł143.53
24h
Available quantity: 5
Available
10:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł108.06
4 weeks
No product available!
No product available!
Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384
zł132.23
24h
Available quantity: 1
Available
298:1 Micro Metal Gearmotor with Extended Motor Shaft
zł117.16
24h
Available quantity: 4
Available
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399