136RPM 6V N20F - miniature gear motor inverted
ID: 582321
5906623459520
zł28.23
Tax included
zł22.95 tax excl.
Small metal gear motor, rotation speed 136 RPM, operating voltage 6 V. GA1024-N20F-0037
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 136 RPM and a maximum torque of 1.1 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Motor type: medium power (MP)
- Gear ratio: 200:1
- Supply voltage: 3-9 V
- Speed: 136 RPM
- Maximum torque: 1,1 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
The recommended supply voltage for the motors is 3 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20F engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
 |
| Dimensions of N20F micromotors (units in mm). |
|---|
Types and parameters of N20F engines:
Our offer includes N20F engines with gear ratios from 50: 1 to 200: 1.
| Gear ratio |
Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 50:1 | MP | 6 V | 381 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
| 150:1 | MP | 6 V | 136 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
| 200:1 | MP | 6 V | 68 RPM | 1,5 kg*cm | 55 mA | 0,58 A | LINK |
Motor controllers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582321
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 150:1
- Rotation speed
- 136 RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
150:1 Micro Metal Gearmotor HP
zł113.31
24h
Available quantity: 1
Available
No product available!
A small, high-power motor with a 250: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 130 RPM, a maximum torque of 3.2 kg * cm and carbon brushes with increased durability. Pololu 3068
zł139.15
4 weeks
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 50 RPM, operating voltage 6 V. GA1036-N20M-0053
zł29.82
24h
Available quantity: 2
Available
Small metal gear motor, 500 RPM speed, 12V operating voltage. GA12-N20-0026
zł20.84
24h
Available quantity: 5
Available
No product available!
No product available!
Small motor with metal gear and encoder, rotation speed 100 RPM, operating voltage 6 V. GA46-N20E-0045
zł38.65
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.27
24h
Available quantity: 3
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł182.89
4 weeks
No product available!
Small metal gear motor, 50 RPM speed, 6V operating voltage. GA12-N20-0010
zł20.84
24h
Available quantity: 4
Available
Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789
zł159.04
24h
Available quantity: 1
Available
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł42.96
24h
Available quantity: 3
Available
Small, high power motor with 298:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 110 RPM, maximum torque 3.3 kg*cm and carbon brushes for extra durability. Pololu 3045
zł139.15
4 weeks
No product available!
Small metal gear motor, rotation speed 68 RPM, operating voltage 6 V. GA1024-N20F-0036
zł27.21
24h
Available quantity: 6
Available
1000:1 Micro Metal Gearmotor
zł195.05
24h
Available quantity: 2
Available
Small metal gear motor, rotation speed 136 RPM, operating voltage 6 V. GA1024-N20F-0037