List of products by brand Inny

7-segment LED display, 1 number 45mm, yellow color (585nm), 15mcd (10mA), common anode, Pb-free. LED1-AS-B-18011BMY

ZYMKEY 4i is a hardware security module designed for Rasbperry Pi. Supports encryption of system files on the memory card, allows for safe storage and generation of security keys.

JACK plug 3.5, stereo, metal.

Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs

Small metal gear motor, 300 RPM speed, 12V operating voltage. GA12-N20-0025

A set for self-assembly of a robotic arm with four degrees of freedom (4DOF) equipped with MG90S servomechisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The handle is controlled using a plate compatible with Arduino Uno or a module with potentiometers.

Anti-magnetic tweezers, straight, made of stainless steel, resistant to corrosion of most solvents and cleaning agents

LED strip with COB diodes in white (warm). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20

Lever with Hall sensor and analog output. Used as a joystick in control panels

Lever with Hall sensor and analog output. Used as a joystick in control panels

HMI module with a 3.5" TFT color LCD display with a resolution of 480x320 px. Equipped with a resistive touch panel. Communication via UART interface. Nextion NX4832T035

Toggle switch, two-position with cover and LED illumination. It can switch voltage up to 12 V and current up to 20 A

A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 50 RPM, operating voltage 6 V. GA1036-N20M-0053

Sensor dedicated to the measurement of nitrogen content in the soil. Allows you to monitor and analyze the level of the element in the soil, and thus optimize fertilization and improve cultivation processes

Bluetooth 4.0 BLE module with UART serial interface. Controlled by AT commands, it can be supplied with the voltage from 3.6 V to 6 V. AT-09/HM-10

Multifunction USB tester. It allows you to check the voltage and current flowing through the USB socket and to control the capacity, energy, power, temperature and impedance. AT34

HMI module with a 3.2" TFT color LCD display with a resolution of 400x240 px. Equipped with a resistive touch panel. Communication via UART interface. Nextion NX4024T032

HMI module with a 2.8" TFT color LCD display with a resolution of 320x240 px. Equipped with a resistive touch panel. Communication via UART interface. Nextion NX3224T028

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 12 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 1.2 m

LED strip with COB diodes in white (neutral). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20