List of products by brand Pololu

High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511

This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/128-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection. 

The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.

Aluminum Standoff: 3/16" Length, 4-40 Thread, F-F (4-Pack)

A set of two Pololu wheels measuring 40x7mm in black. Fits D-shaped shaft with a diameter of 3mm. Pololu 1452

This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.

This item is a pair of motor-holding clips for the Romi chassis in white. These clips snap into the main Romi base plate, and then the motors snap into the clips. It is included as part of the white Romi Chassis Kit.

Pololu Universal Aluminum Mounting Hub for 1/4â€l Shaft, M3 Holes (2-Pack)

Module with a digital distance sensor with a range of up to 100 cm. It has a digital output that goes low when an object is detected. Pololu 4069

Pololu Universal Aluminum Mounting Hub for 5mm Shaft Pair

50:1 Micro Metal Gearmotor HP with Extended Motor Shaft

DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015

DC-DC Step-Up converter U3V40F6 with an output voltage of 6 V, an input voltage of 1.3 to 6 V and a maximum output current of 4 A. Pololu 4013

Twisted Servo Extension Cable 24" Male - Female

Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783

Tracked chassis kit for the Pololu Zumo minisumo robot. The kit does not contain motors, batteries and electronic components. Pololu 1418

Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789

6-pin female JST SH-type connector that works with Micro Metal Gearmotor Encoders. Pololu 4764

Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4147

Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), rated voltage of 3.8 V, and has a current consumption of 0.67 A per coil. Pololu 1205