zł44.34 tax excl.
Compact module for bidirectional current measurement using the galvanically isolated Allegro ACS37030LMYATR-065B3 sensor. A combination of Hall-effect sensing and an inductive coil provides DC to 5 MHz measurement bandwidth, a ±65 A range, and a typical response time of 40 ns. Pololu 5696
Current sensor module Pololu 5696 uses the Allegro ACS37030LMYATR-065B3 electrically isolated current sensor. The device provides bidirectional current measurement from -65 A to +65 A and uses two signal paths: a Hall-effect sensor for DC and low-frequency current information and an inductive coil for high-frequency signals. This combination provides measurement bandwidth from DC to 5 MHz and a typical response time of approximately 40 ns.
Sensor operates from a 3.0–3.6 V supply, with 3.3 V nominal operation, and provides a sensitivity of 20.3 mV/A. The analog VOUT output is centered at 1.65 V at zero current and changes proportionally to the measured current. The VREF output provides a reference voltage that can be used in applications exposed to electrical noise.
Galvanically isolated current path provides a working isolation rating of 1000 VRMS, while the minimum PCB creepage distance is approximately 11.7 mm. The sensor IC current path resistance is typically 0.9 mΩ, helping to reduce power losses. The compact 2-layer PCB uses 2 oz copper, measures approximately 20.3 × 27.9 mm, and weighs approximately 1.8 g.
Manufacturer
Responsible person
Module with INA219 system with bi-directional current meter
No product available!
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 50 A. Cytron BB-ACS756
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 10 A. DFRobot SEN0288
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 5A. DFRobot SEN0287
INA169 current sensor module. The system can be supplied with the voltage from 2.7 V to 60 V and has an analog output. SparkFun SEN-12040
No product available!
Compact module for bidirectional current measurement using the galvanically isolated Allegro ACS37030LMYATR-065B3 sensor. A combination of Hall-effect sensing and an inductive coil provides DC to 5 MHz measurement bandwidth, a ±65 A range, and a typical response time of 40 ns. Pololu 5696