New products
New products
zł67.99
24h
Available
zł69.00
24h
Available
zł67.99
24h
Available
Available
zł79.00
24h
Available
zł67.99
24h
Available
zł69.00
24h
Available
zł67.99
24h
Available
Available
zł79.00
24h
Available
ACS724 Current Sensor Carrier - ACS724 0-5A current sensor module
ID: 1186897
5906623469239
zł32.07
Tax included
zł26.07 tax excl.
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
Description
Module with a two-way Hall current sensor based on the ACS724LLCTR-05AU chip. It allows you to measure the current in the range from 0 to 5 A. The board is powered with the voltage from 4.5 V to 5.5 V and is intended for use in circuits with a logical voltage of 5 V. It offers a current path with low resistance (~ 1.2 mΩ) and electrical insulation up to 2.4 kV RMS. The output is a proportional analog voltage (800 mV/A) with offset 0.5 V and an error of ± 0,9%.
The sensor requires five connections to work properly: input current (IP+ and IP-), logic power (VCC and GND) and sensor output (OUT). Pin FILTER allows you to adjust the bandwidth of the plate by adding a capacitor to ground in parallel with the 1 nF capacitor that is already on the board. Without an additional external filter capacitor, the frequency response is approximately 90 kHz.
Features
- Hall effect differential detection
- Internal resistance of 1.2 mΩ conducting path
- Electrical insulation up to 2.4 kV RMS
- 120kHz high bandwidth for fast response times
- Ability to filter the output data to improve the resolution
- Integrated digital temperature compensation circuit
- Operating voltage 4.5 to 5.5 V
- Current measuring range from 0 to 5 A
- Output resolution 0.8 V/A
- Working temperature range from -40°C to 150°C
- Dimensions: 17.8 x 20.3 mm
- Weight: 1.1 g
Kit contains
- ACS724 Current Sensor Carrier module
- Straight 3-pin male connector
1186897
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 5 A
- Sposób podłączenia
- Szeregowy
- Allegro ACS724 current sensor datasheet (1,45 MB)
- Dimension diagram of the ACS724 Current Sensor Carrier (755,1 kB)
- 3D model of the ACS724 Current Sensor Carrier (2,56 MB)
- Drill guide for ACHS-712x Current Sensor Carriers (16,56 kB)
- Allegro Application Note AN296169: Characterizing System Bandwidth in Complex Current Sensor Applications (843,98 kB)
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.01 24hAvailable quantity: 390 AvailableA set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.19 24hAvailable quantity: 291 Available
Other products in the same category (16)
ACS711EX Current Sensor Carrier -15.5A to +15.5A
zł15.93 24hAvailable quantity: 8 Available- Available
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy loss. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5304
zł35.42 24hAvailable quantity: 3 AvailableModule with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł100.82 24hAvailable quantity: 1 AvailableThe ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł17.85 24hAvailable quantity: 2 Available- Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł58.22 24hAvailable quantity: 1 AvailableACS714 Current Sensor Carrier -30 to +30A
zł53.03 24hAvailable quantity: 2 AvailableCurrent-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł23.87 24hAvailable quantity: 9 AvailableThe ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5258
zł44.93 24hAvailable quantity: 2 AvailableThe ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł44.93 24hAvailable quantity: 2 AvailableThe INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062
zł57.38 24hAvailable quantity: 2 AvailableACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł31.49 24hAvailable quantity: 1 AvailableThe ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262
zł44.93 24hAvailable quantity: 2 AvailableThis board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł34.26 24hAvailable quantity: 6 AvailablePower monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873
zł179.00 3 weeks No product available!
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048