ACS72981 Current Sensor 0-100A 3.3V Pololu 5275
ID: 1194414
5902186336780
zł62.84
Tax included
zł51.09 tax excl.
Large Carrier version current sensor from Pololu, model 5275, based on the ACS72981LLRATR-100U3 IC, designed for measuring current in the range from 0 A to 100 A at a 3.3 V supply in applications requiring galvanic isolation and analog output. Pololu 5275
Description
Large Carrier version current sensor from Pololu, model 5275, based on the ACS72981LLRATR-100U3, designed for measuring AC and DC current in the range from 0 A to 100 A at a nominal supply voltage of 3.3 V. Measurement is performed using the Hall effect in an isolated current path with low resistance of approximately 0.2 mΩ, which reduces power losses and minimizes the impact of the sensor on the measured circuit.
The output signal is provided as an analog voltage proportional to the current, with a quiescent voltage level of approx. 0.33 V. The module offers bandwidth up to 250 kHz and response time below 2 µs, enabling monitoring of fast current changes in power electronics systems.
The use of a 6-layer PCB improves heat dissipation and stability during high-current operation. Integrated temperature compensation increases measurement accuracy over a wide temperature range. The module is intended for applications with voltages below 30 V.
Features
- Sensing IC: ACS72981LLRATR-100U3
- Sensing technology: Hall effect
- Current measurement range: From 0 A to 100 A
- Current type: AC and DC (unidirectional)
- Supply voltage: 3.0 - 3.6 V
- Nominal voltage: 3.3 V
- Output type: Analog, proportional to current
- Sensitivity: 26.4 mV/A
- Zero-current output voltage: Approx. 0.33 V
- Bandwidth: Up to 250 kHz
- Response time: < 2 µs
- Current path resistance: Approx. 0.2 mΩ
- Measurement method: In-line, galvanically isolated
- Supply current: Approx. 14 mA
- PCB: 6 layers, 2 oz copper
- Signal pin pitch: 2.54 mm
- Dimensions: 1.4″ x 1.2″ (approx. 35.6 x 30.5 mm)
- Weight: Approx. 4.2 g
- Operating temperature: From -40°C to +150°C
- Manufacturer: Pololu
- Manufacturer code: 5275
1194414
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 100 A
- Sposób podłączenia
- Szeregowy
- Dimension diagrams of the ACS72981xLR Current Sensor Carriers (391,08 kB)
- 3D model of the ACS72981xLR Current Sensor Large Carriers (3,11 MB)
- Drill guide for the ACS72981xLR Current Sensor Large Carriers (18,12 kB)
- Schematic diagram (30,23 kB)
- ACS72981 Current Sensor Large Carrier basic hole and slot dimensions. (59,82 kB)
- ACS72981 datasheet
- Allegro Application Note AN296169: Characterizing System Bandwidth in Complex Current Sensor Applica
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
zł6.86
4 weeks
No product available!
No product available!
No product available!
No product available!
No product available!
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 20
Available
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.95
4 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł91.49
24h
Available quantity: 1
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
24h
Available quantity: 1
Available
Module with INA219 system with bi-directional current meter
zł10.01
4 weeks
No product available!
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 1
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
zł64.69
3 weeks
No product available!
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł22.02
4 weeks
No product available!
Large Carrier version current sensor from Pololu, model 5275, based on the ACS72981LLRATR-100U3 IC, designed for measuring current in the range from 0 A to 100 A at a 3.3 V supply in applications requiring galvanic isolation and analog output. Pololu 5275