CT220RMV-HS5 Contactless Current Sensor Carrier ±15mT/150G
ID: 1199029
5902186323032
zł18.77
Tax included
zł15.26 tax excl.
Allegro's TMR sensor module enables precise, non-contact current measurement without breaking the circuit. It offers high sensitivity, low power consumption, an analog output proportional to the magnetic field, and a threshold detection (FLAG) function. Its compact design, AC/DC support, and easy installation make it ideal for energy-efficient and safe current monitoring systems. Pololu 5355
Description
CT220RMV-HS5 Contactless Current Sensor Carrier Module is a compact board featuring a sensor from Allegro Microsystems, based on XtremeSense™ TMR (Tunnel MagnetoResistance) technology, designed for non-contact current measurement.
This solution enables precise current measurement without interrupting the circuit – the sensor detects the magnetic field generated by current flowing through a nearby conductor. The TMR technology ensures high sensitivity and low power consumption, making the sensor ideal for use in energy-efficient systems.
The device offers high linearity, resolution, and temperature stability, while maintaining high electrical isolation. The analog output, proportional to the magnetic field intensity, allows accurate current measurements after proper calibration. The sensor operates in a bidirectional mode, supporting both AC and DC systems. With its compact size and mounting holes, it can be easily fixed onto a wire. The JST SH connector and 2.54 mm pitch through-holes offer flexibility for connectivity. Additionally, the FLAG output indicates when the magnetic field exceeds a certain threshold. This module is an excellent choice for projects that require safe and reliable current monitoring.
Features
- Sensor model: Allegro CT220RMV-HS5
- Magnetic field measurement range: ±15 mT (±150 G)
- Sensitivity at 5 V: 150 mV/mT
- Ratiometric analog output (centered around VDD/2)
- FLAG output active when exceeding 90% or dropping below 10% of field range
- Response time: typically 20 µs
- Bandwidth: 30 kHz (with built-in RC filter)
- Connectors: JST SH 4-pin or 0.1″ (2.54 mm) through-holes
- Supply voltage: 2.7 V to 5.5 V
- Current consumption: approx. 1.2 mA
- Operating temperature: −40 °C to 125 °C
- Dimensions: 10.2 × 15.7 × 5 mm
- Weight: 0.4 g
1199029
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±800 A
- Sposób podłączenia
- Nieinwazyjny
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł38.40
24h
Available quantity: 1
Available
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł44.72
Delivery date unknown
No product available!
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł19.90
24h
Available quantity: 9
Available
Other products in the same category (16)
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.70
24h
Available quantity: 2
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5450
zł17.99
4 weeks
No product available!
Analogue current sensor module. Allows measurement of AC and DC currents up to 50 A. DFRobot SEN0098-V2
zł73.42
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259
zł58.79
24h
Available quantity: 2
Available
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł19.90
24h
Available quantity: 9
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 14
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5234
zł56.49
6 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
zł58.79
24h
Available quantity: 2
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł42.39
24h
Available quantity: 4
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5272
zł71.45
24h
Available quantity: 5
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291
zł29.32
24h
Available quantity: 4
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5452
zł17.74
6 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5264
zł52.91
24h
Available quantity: 2
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5295
zł46.19
24h
Available quantity: 4
Available
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56
24h
Available quantity: 9
Available
Allegro's TMR sensor module enables precise, non-contact current measurement without breaking the circuit. It offers high sensitivity, low power consumption, an analog output proportional to the magnetic field, and a threshold detection (FLAG) function. Its compact design, AC/DC support, and easy installation make it ideal for energy-efficient and safe current monitoring systems. Pololu 5355