ACS37220LEZATR-150B3 Current Sensor - module with current sensor from -150A to 150A, 3.3V
ID: 1194423
5906623499229
zł29.32
Tax included
zł23.84 tax excl.
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291
Description
The ACS37220 Hall Effect Current Sensor is a current sensing module based on the Hall effect, offering electrical isolation and a wide bandwidth of 150 kHz. With its ultra-low conductive path resistance, it ensures minimal power loss and high measurement efficiency. The sensor can be placed anywhere in the circuit and used in applications requiring galvanic isolation. Thanks to differential Hall sensing, the device is resistant to external magnetic interference, ensuring high accuracy. The sensor outputs an analog voltage proportional to the current value, enabling measurement of both DC and AC current. The module operates with a supply voltage from 3.15 V to 3.45 V, and the output is ratiometric, meaning its center point is VCC/2 and changes by 8.8 mV per ampere of current flow. Its fast response time makes it ideal for high-speed measurement systems and real-time current monitoring.
For proper operation, the sensor requires five connections: current input (IP+ and IP−), logic power supply (VCC and GND), and sensor output (VOUT). The FAULT pin is internally pulled up to VDD and is pulled low when the current IP exceeds the configured overcurrent threshold in either direction. This output indicates the current fault status. The module uses a multilayer PCB for high durability and reliability. Large mounting holes allow connection via wires or screw terminals. Alternatively, 2.54 mm pitch holes are also available, although not recommended for high-current applications. Thanks to its high accuracy, flexible mounting options, and resistance to interference, the sensor is ideal for use in power systems, power converters, battery monitoring circuits, and motor control systems.
Features
- Sensor type: Allegro ACS37220
- Measurement range: up to 150 A
- Technology: Hall effect with galvanic isolation
- Bandwidth: 150 kHz
- Supply voltage: 3.15 V to 3.45 V
- Conduction path resistance: 0.1 mΩ
- Analog output proportional to current intensity
- Ratiometric output voltage centered at VCC/2
- Fast response time: below 4 µs
- Built-in digital temperature compensation
- Supports both DC and AC current
- Overcurrent fault indication output (FAULT pin)
- Connection options: screw terminals, 2.54 mm pins
- Pin pitch: 2.54 mm (breadboard compatible)
- Dimensions: 17.8 x 20.3 mm
- Weight: 1 g
1194423
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±150 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290
zł28.28
24h
Available quantity: 3
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293
zł29.32
24h
Available quantity: 6
Available
Other products in the same category (16)
Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873
zł179.00
3 weeks
No product available!
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy loss. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5304
zł52.79
24h
Available quantity: 2
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł18.82
24h
Available quantity: 1
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5261
zł58.78
24h
Available quantity: 2
Available
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł42.14
24h
Available quantity: 2
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. Pololu 5410
zł133.97
4 weeks
No product available!
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł51.82
4 weeks
No product available!
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł63.04
24h
Available quantity: 2
Available
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł40.55
24h
Available quantity: 3
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł39.31
24h
Available quantity: 2
Available
No product available!
ACS714 Current Sensor Carrier -5 to +5A
zł107.82
24h
Available quantity: 1
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.70
24h
Available quantity: 2
Available
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł100.82
4 weeks
No product available!
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł74.26
4 weeks
No product available!
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291