zł971.80
ACS37220LEZATR-150B5 Current Sensor - module with current sensor from -150A to 150A, 5V
ID: 1194425
5906623499236
zł29.32
Tax included
zł23.84 tax excl.
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293
Description
The ACS37220 Hall Effect Current Sensor is a current sensing module based on the Hall effect, offering electrical isolation and a wide bandwidth of 150 kHz. Thanks to its very low conductive path resistance, it ensures minimal power loss and high measurement efficiency. The sensor can be placed anywhere in the circuit and used in applications requiring galvanic isolation. With the use of differential Hall sensing, the device is resistant to external magnetic field interference, increasing measurement accuracy. The sensor provides an analog voltage proportional to the current value, enabling measurements of both DC and AC current. The module operates with a supply voltage from 4.5 V to 5.5 V, and its output is ratiometric, meaning its midpoint value is VCC/2 and changes by 13.3 mV × (VCC/3.3 V) per amp of current flow. A short response time makes the sensor ideal for fast measurement systems and real-time current monitoring.
For proper operation, the sensor requires five connections: current input (IP+ and IP−), logic power supply (VCC and GND), and sensor output (VIOUT). The module uses a multilayer PCB for high durability and reliability. Large mounting holes allow easy connection via wires or screw terminals. Alternatively, 2.54 mm pitch holes are available, although they are not recommended for high current. With high accuracy, versatile mounting options, and strong resistance to interference, the sensor is suitable for use in power systems, power converters, battery monitoring circuits, and motor control systems.
Features
- Sensor type: Allegro ACS37220
- Measurement range: up to 150 A
- Technology: Hall effect with galvanic isolation
- Bandwidth: 150 kHz
- Supply voltage: 4.5 V to 5.5 V
- Conduction path resistance: 0.1 mΩ
- Analog output proportional to current intensity
- Ratiometric output voltage with midpoint at VCC/2
- Fast response time: below 4 µs
- Built-in digital temperature compensation
- Supports DC and AC current
- Connection options: screw terminals, 2.54 mm pins
- Pin pitch: 2.54 mm (breadboard compatible)
- Dimensions: 17.8 x 20.3 mm
- Weight: 1 g
1194425
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±150 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290
zł26.94
24h
Available quantity: 5
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291
zł29.32
24h
Available quantity: 3
Available
Compact Pololu 5292 current sensor based on the ACS37220 IC, designed for measuring currents up to ±100 A at a 5 V supply voltage in applications requiring galvanic isolation and an analog output. Pololu 5292
zł26.04
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł34.77
24h
Available quantity: 3
Available
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł44.72
4 weeks
No product available!
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł18.92
24h
Available quantity: 11
Available
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł17.92
24h
Available quantity: 2
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
3 weeks
No product available!
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407
zł136.90
3 weeks
No product available!
Analogue current sensor module. Allows measurement of AC and DC currents up to 50 A. DFRobot SEN0098-V2
zł73.42
24h
Available quantity: 2
Available
Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873
zł179.00
3 weeks
No product available!
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
zł35.78
24h
Available quantity: 2
Available
ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047
zł42.14
24h
Available quantity: 5
Available
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł36.21
24h
Available quantity: 5
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł38.38
24h
Available quantity: 7
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł36.90
24h
Available quantity: 3
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł74.92
24h
Available quantity: 4
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł20.02
24h
Available quantity: 4
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł22.16
24h
Available quantity: 2
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293