STEMMA QT INA3221 - module with 3-channel current sensor 0-26 VDC, ±3.2 A
ID: 1195186
5906623497485
zł54.83
Tax included
zł44.58 tax excl.
The INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062
Description
The INA3221 module is the perfect solution for those who need to monitor multiple power rails simultaneously. Instead of using several multimeters, you only need to connect the sensor board, which enables voltage and DC current measurements for three power sources via the I2C interface with an accuracy of ±1%. The INA3221 module allows measurements for voltages up to +26 VDC while being powered by a 3V or 5V system, making it ideal for battery life monitoring or solar panels.
The precise amplifier measures voltage on the built-in 0.05Ω (1%) shunt resistors, allowing for current measurements up to ±3.2A. With the 13-bit ADC, the resolution for measurements in this range is 0.4 mA. Advanced users can replace the shunt resistor to adjust the measurement range—for example, using a 0.01Ω resistor allows measuring currents up to 16.4A with a resolution of 2 mA.
Usage is very simple—just connect the module to a power source from 3 to 5VDC, connect the I2C pins to the microcontroller, and connect the monitored sources to the VIN1/2/3+ inputs, while connecting the loads to VIN1/2/3-. There is also the option to configure overcurrent warning outputs.
Features
- Voltage measurement range: 0 V to 26 V
- Current measurement range: ±3.2 A (expandable by replacing the shunt resistor)
- Built-in measurement resistors: 0.05Ω (1%)
- Measurement accuracy: ±1%
- 13-bit ADC with a resolution of 0.4 mA at ±3.2A
- Configurable averaging options for measurements
- Programmable warning and alarm outputs
- I2C interface support (default address 0x40, changeable to 0x41)
- Power supply voltage: 2.7V to 5.5V
- Dimensions: 38.6 x 22.9 x 10.5 mm
- Weight: 5.8 g
1195186
Data sheet
- Interface
- I2C
- Zakres pomiarowy
- ±3,2 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
zł5.83
Delivery date unknown
No product available!
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
zł5.34
24h
Available quantity: 49
Available
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
zł7.63
24h
Available quantity: 29
Available
4-core cable with a length of 300 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5384
zł10.04
Delivery date unknown
No product available!
4-core cable with a length of 400 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5385
zł7.54
24h
Available quantity: 12
Available
Other products in the same category (16)
No product available!
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 20
Available
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.95
4 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł91.49
24h
Available quantity: 1
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
24h
Available quantity: 1
Available
Module with INA219 system with bi-directional current meter
zł10.01
4 weeks
No product available!
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 1
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
zł64.69
3 weeks
No product available!
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł22.02
4 weeks
No product available!
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł12.20
4 weeks
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56
24h
Available quantity: 5
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł51.82
4 weeks
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł37.80
24h
Available quantity: 3
Available
The INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062