Intel WiFi 6E AX210NGW Bluetooth 5.3 5374Mbps M.2 2230 Network Card

WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.

SPWF01SC are intelligent Wi-fi modules. Thanks to the Plug-And-Play solution and the autonomous 802.11 b/g/n solution, the module has the ability to easily integrate the wireless function with existing or new products.

HF-A11-0 is a UART-based Wi-Fi module enabling quick wireless integration in embedded designs. With built-in TCP/IP stack and compact form factor, it is well suited for IoT, automation, and remote communication applications.

High-Flying WiFi module, IEEE802.11b / g / n, with integrated PCB antenna, RoHS. HF-LPB100-1

Miniature (25x40mm) WiFi b/g/n module for surface mounting with support for TCP and UDP protocols operating in standalone and access point modes. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V

Miniature (25x40mm) WiFi b / g / n module with 2.0mm goldpin connection with TCP and UDP protocols operating in standalone and access point mode. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V. HF-A11-1

WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07

WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E

Development board ESP8266 with WiFi module; WRL-13231

Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05

WiFi module based on ESP8266. The module has a built-in antenna and USB-UART converter. The module can be programmed in Lua (under the control of the NodeMCU firmware) or in the Arduino environment. 10 GPIO lines are available which each can be configured to work as PWM, I2C.

Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. WRL-13287

With an integrated ESP8266 WiFi controller this module is a one-stop shop for almost any Internet-connected project. Firmware can be developed in Arduino and uploaded over a simple, serial interface. WRL-13711

Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE

Easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project. WRL-13794

An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335