New products
New products New products
zł119.00
Delivery date unknown
zł119.00
Delivery date unknown
ACS37220LEZATR-100B3 Current Sensor - module with current sensor from -100A to 100A, 3.3V
ID: 1194422
5906623499212
zł26.94
Tax included
zł21.90 tax excl.
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290
Description
The ACS37220 Hall Effect Current Sensor is a current sensing module based on the Hall effect, offering electrical isolation and a wide bandwidth of 150 kHz. With its ultra-low conductive path resistance, it ensures minimal power loss and high measurement efficiency. The sensor can be placed anywhere in the circuit and used in applications requiring galvanic isolation. Thanks to differential Hall sensing, the device is resistant to external magnetic interference, ensuring high accuracy. The sensor outputs an analog voltage proportional to the current value, enabling measurement of both DC and AC current. The module operates with a supply voltage from 3.15 V to 3.45 V, and the output is ratiometric, meaning its center point is VCC/2 and changes by 13,2 mV per ampere of current flow. Its fast response time makes it ideal for high-speed measurement systems and real-time current monitoring.
For proper operation, the sensor requires five connections: current input (IP+ and IP−), logic power supply (VCC and GND), and sensor output (VOUT). The FAULT pin is internally pulled up to VDD and is pulled low when the current IP exceeds the configured overcurrent threshold in either direction. This output indicates the current fault status. The module uses a multilayer PCB for high durability and reliability. Large mounting holes allow connection via wires or screw terminals. Alternatively, 2.54 mm pitch holes are also available, although not recommended for high-current applications. Thanks to its high accuracy, flexible mounting options, and resistance to interference, the sensor is ideal for use in power systems, power converters, battery monitoring circuits, and motor control systems.
Features
- Sensor type: Allegro ACS37220
- Measurement range: up to 100 A
- Technology: Hall effect with galvanic isolation
- Bandwidth: 150 kHz
- Supply voltage: 3.15 V to 3.45 V
- Conduction path resistance: 0.1 mΩ
- Analog output proportional to current intensity
- Ratiometric output voltage centered at VCC/2
- Fast response time: below 4 µs
- Built-in digital temperature compensation
- Supports both DC and AC current
- Overcurrent fault indication output (FAULT pin)
- Connection options: screw terminals, 2.54 mm pins
- Pin pitch: 2.54 mm (breadboard compatible)
- Dimensions: 17.8 x 20.3 mm
- Weight: 1 g
1194422
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±100 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291
zł29.32
24h
Available quantity: 4
Available
Compact Pololu 5292 current sensor based on the ACS37220 IC, designed for measuring currents up to ±100 A at a 5 V supply voltage in applications requiring galvanic isolation and an analog output. Pololu 5292
zł26.04
24h
Available quantity: 3
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293
zł29.32
24h
Available quantity: 5
Available
Other products in the same category (16)
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 2
Available
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
zł18.77
24h
Available quantity: 1
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
3 weeks
No product available!
Compact Pololu 5294 current sensor based on the ACS37220 IC, designed for measuring currents up to ±200 A at a 5 V supply voltage in applications requiring galvanic isolation and an analog output. Pololu 5294
zł26.04
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł55.92
24h
Available quantity: 2
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 28
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5446
zł17.10
24h
Available quantity: 3
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
This module provides precise current, voltage, and power measurement in DC systems up to 85V and 10A. It features a 16-bit ADC, fast alarm response, and an I2C interface for easy integration with Arduino, Raspberry Pi, and CircuitPython. The module supports both high- and low-side measurement and automatic power calculation, and the STEMMA QT connector allows for quick, solderless installation. Adafruit 6349
zł55.23
24h
Available quantity: 3
Available
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.95
4 weeks
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56
24h
Available quantity: 8
Available
Module with ACS724LLCTR-10AU current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4042
zł50.36
24h
Available quantity: 1
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł20.02
24h
Available quantity: 5
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5263
zł50.06
24h
Available quantity: 6
Available
The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5264
zł52.91
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
zł21.07
24h
Available quantity: 3
Available
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290