.png)
Gravity: Analog 50A Current Sensor - module with analog 50A AC/DC current sensor
ID: 581607
5902186314566
zł134.91
Tax included
zł109.68 tax excl.
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
Description
Module with an analog current sensor ACS758. It enables the measurement of alternating and direct current up to 50 A. The module has an analog output compatible with the Gravity standard. The measurement is based on the use of the Hall effect. The sensor has a stable measurement and almost zero magnetic hysteresis. The ACS758 has a low internal resistance of 100 μΩ and therefore generates low power losses during operation. The module will be used in projects of controlling automation devices. On the Wiki page there is a user manual with a sample Arduino program.
Features
- Current measuring range: -50 to 50 A
- Maximum measurement voltage: 3000 V AC, 500 V DC
- Bandwidth: 120kHz
- 3 μs rise time in response to step input current
- Stable output voltage
- Nearly zero magnetic hysteresis
- Internal resistance 100 μΩ
- Sensitivity: 40 mV / A
- Interface: Gravity PH2.0-3P
- Power supply: from 3.3 V to 5 V
- Dimensions: 34 x 34 mm
Kit contains
- Module with AC/DC current sensor
- Gravity-3P cable
581607
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±50 A
- Sposób podłączenia
- Szeregowy
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
Delivery date unknown
No product available!
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł22.74
24h
Available quantity: 6
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
Delivery date unknown
No product available!
Other products in the same category (16)
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł12.90
24h
Available quantity: 12
Available
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł9.69
24h
Available quantity: 25
Available
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł91.49
24h
Available quantity: 1
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
4 weeks
No product available!
Module with INA219 system with bi-directional current meter
zł10.23
24h
Available quantity: 14
Available
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 1
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
zł69.11
24h
Available quantity: 2
Available
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł22.10
24h
Available quantity: 4
Available
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł12.20
24h
Available quantity: 12
Available
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł31.17
24h
Available quantity: 5
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł49.69
4 weeks
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł38.92
24h
Available quantity: 1
Available
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł18.56
24h
Available quantity: 5
Available
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098