ACS72981KLRATR-150U5 Current Sensor - current sensor module 0-150A, 5V
ID: 1194406
5906623497393
zł58.79
Tax included
zł47.80 tax excl.
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5260
Description
The ACS72981 current sensor module is a state-of-the-art solution based on the Hall effect, providing electrical isolation of the current path. This allows it to be placed anywhere in an electrical circuit while offering safe and precise measurements. The sensor features a noise-resistant design, eliminating the influence of uniform magnetic fields such as the Earth's field. With a low conduction path resistance (0.2 mΩ) and a multi-layer PCB (6 layers, 2 oz copper), energy losses are minimized.
The sensor provides a wide-band analog output (up to 250 kHz) proportional to AC or DC current, with a response time of less than 2 µs. A built-in digital temperature compensation mechanism enhances measurement accuracy across a wide temperature range.
Multiple mounting methods allow for easy integration into circuits – you can solder wires directly to the holes, use solderless ring terminals, or attach screw terminals. The largest holes accommodate wires up to 8 AWG and M3.5 screws, while additional 3.5 mm and 5 mm holes support screw connectors or header pins.
The module is ideal for applications requiring precise current measurement, such as energy management systems, battery monitoring, protection circuits, and industrial electronics. Its electrical isolation allows safe current monitoring in high-voltage systems, while its low power consumption makes it suitable for mobile and battery-powered devices. With a user-friendly interface and compact design, the sensor is an excellent choice for both professionals and hobbyists. It can be used in prototyping, testing, and as a component in fully developed measurement systems. The ease of integration and broad range of applications make the ACS72981 an essential tool in modern electronics.
Features
- Sensor: Allegro ACS72981KLRATR-150U5
- Measurement range: 0 A to 150 A
- Sensitivity: 26,7 mV/A
- Supply current: 14 mA
- Hall effect sensor with an isolated current path
- Operating voltage range: 4.5V to 5.5V
- Conduction resistance: 0.2 mΩ
- Bandwidth: 250 kHz
- Response time: < 2 µs
- Analog output: voltage proportional to current
- Temperature compensation: built-in digital compensation
- Mounting options: soldered wires, ring terminals, screw terminals
- Supported wires: 8 AWG (M3.5), 12 AWG (M2)
- Dimensions: 17.78 x 20.32 mm
- Weight: 1.4 g
1194406
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 150 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.70
Delivery date unknown
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł58.79
24h
Available quantity: 2
Available
Other products in the same category (16)
Allegro\'s TMR sensor module enables precise, non-contact current measurement without breaking the circuit. It offers high sensitivity, low power consumption, an analog output proportional to the magnetic field, and a threshold detection (FLAG) function. Its compact design, AC/DC support, and easy installation make it ideal for energy-efficient and safe current monitoring systems. Pololu 5355
zł18.77
24h
Available quantity: 3
Available
ACS711EX Current Sensor Carrier -31A to +31A
zł19.98
24h
Available quantity: 5
Available
SCT010T-D 10A 5V AC Current Sensor. Enables measurement of high AC currents. modSCT010T-D
zł32.03
24h
Available quantity: 4
Available
This module provides precise current, voltage, and power measurement in DC systems up to 85V and 10A. It features a 16-bit ADC, fast alarm response, and an I2C interface for easy integration with Arduino, Raspberry Pi, and CircuitPython. The module supports both high- and low-side measurement and automatic power calculation, and the STEMMA QT connector allows for quick, solderless installation. Adafruit 6349
zł55.23
24h
Available quantity: 3
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł51.82
4 weeks
No product available!
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
zł18.77
24h
Available quantity: 2
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł75.92
24h
Available quantity: 1
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.37
24h
Available quantity: 3
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł22.15
24h
Available quantity: 3
Available
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 50 A. Cytron BB-ACS756
zł82.51
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5271
zł71.45
24h
Available quantity: 5
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231
zł45.45
24h
Available quantity: 3
Available
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
zł40.09
24h
Available quantity: 2
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł42.39
24h
Available quantity: 4
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5453
zł17.86
24h
Available quantity: 3
Available
The INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062
zł54.35
24h
Available quantity: 4
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5260