ACS72981LLRATR-050U3 Current Sensor - current sensor module 0-50A, 3.3V
ID: 1194398
5906623497317
zł56.70
Tax included
zł46.10 tax excl.
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
Description
The ACS72981 current sensor module is a state-of-the-art solution based on the Hall effect, providing electrical isolation of the current path. This allows it to be placed anywhere in an electrical circuit while offering safe and precise measurements. The sensor features a noise-resistant design, eliminating the influence of uniform magnetic fields such as the Earth's field. With a low conduction path resistance (0.2 mΩ) and a multi-layer PCB (6 layers, 2 oz copper), energy losses are minimized.
The sensor provides a wide-band analog output (up to 250 kHz) proportional to AC or DC current, with a response time of less than 2 µs. A built-in digital temperature compensation mechanism enhances measurement accuracy across a wide temperature range.
Multiple mounting methods allow for easy integration into circuits – you can solder wires directly to the holes, use solderless ring terminals, or attach screw terminals. The largest holes accommodate wires up to 8 AWG and M3.5 screws, while additional 3.5 mm and 5 mm holes support screw connectors or header pins.
The module is ideal for applications requiring precise current measurement, such as energy management systems, battery monitoring, protection circuits, and industrial electronics. Its electrical isolation allows safe current monitoring in high-voltage systems, while its low power consumption makes it suitable for mobile and battery-powered devices. With a user-friendly interface and compact design, the sensor is an excellent choice for both professionals and hobbyists. It can be used in prototyping, testing, and as a component in fully developed measurement systems. The ease of integration and broad range of applications make the ACS72981 an essential tool in modern electronics.
Features
- Sensor: Allegro ACS72981LLRATR-050U3
- Measurement range: 0 A to 50 A
- Sensitivity: 52,8 mV/A
- Supply current: 14 mA
- Hall effect sensor with an isolated current path
- Operating voltage range: 3V to 3.6V
- Conduction resistance: 0.2 mΩ
- Bandwidth: 250 kHz
- Response time: < 2 µs
- Analog output: voltage proportional to current
- Temperature compensation: built-in digital compensation
- Mounting options: soldered wires, ring terminals, screw terminals
- Supported wires: 8 AWG (M3.5), 12 AWG (M2)
- Dimensions: 17.78 x 20.32 mm
- Weight: 1.4 g
1194398
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 50 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.70
Delivery date unknown
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł58.79
24h
Available quantity: 2
Available
Other products in the same category (16)
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5260
zł58.79
24h
Available quantity: 2
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.95
24h
Available quantity: 2
Available
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 5A. DFRobot SEN0287
zł81.82
24h
Available quantity: 3
Available
Module with INA237 sensor designed for power monitoring. Allows measurement of voltages up to 85 VDC and current up to 10 A. Uses a 16-bit ADC for precise and accurate readings available via the I2C interface. Adafruit 6340
zł49.82
4 weeks
No product available!
Module with INA219 system with bi-directional current meter
zł10.01
4 weeks
No product available!
This module provides precise current, voltage, and power measurement in DC systems up to 85V and 10A. It features a 16-bit ADC, fast alarm response, and an I2C interface for easy integration with Arduino, Raspberry Pi, and CircuitPython. The module supports both high- and low-side measurement and automatic power calculation, and the STEMMA QT connector allows for quick, solderless installation. Adafruit 6349
zł55.23
24h
Available quantity: 3
Available
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
zł6.86
24h
Available quantity: 2
Available
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł42.14
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250
zł56.69
24h
Available quantity: 3
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231
zł45.45
24h
Available quantity: 3
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5457
zł18.99
24h
Available quantity: 3
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412
zł191.44
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262
zł58.50
4 weeks
No product available!
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy loss. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5304
zł52.79
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252