New products
New products New products
zł119.00
Delivery date unknown
zł119.00
Delivery date unknown
CT220BMV-HS5 Contactless Current Sensor - module with a non-contact current sensor ±1.5mT/15G
ID: 1199030
5902186323049
zł18.77
Tax included
zł15.26 tax excl.
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
Description
CT220BMV-HS5 Contactless Current Sensor Carrier Module is a compact board featuring a sensor from Allegro Microsystems, based on XtremeSense™ TMR (Tunnel MagnetoResistance) technology, designed for non-contact current measurement.
This solution enables precise current measurement without breaking the circuit – the sensor detects the magnetic field generated by current flowing through a nearby conductor. TMR technology ensures high sensitivity and low power consumption, making it ideal for energy-efficient applications.
The device offers high linearity, resolution, and temperature stability, while maintaining excellent electrical isolation. The analog output, proportional to the magnetic field strength, allows for accurate current measurements after proper calibration. The sensor operates in bidirectional mode, supporting both DC and AC systems. Its compact size and mounting holes allow for easy attachment to a wire. The JST SH connector and 2.54 mm pitch through-holes provide flexible connectivity options. Additionally, the FLAG output signals when the magnetic field exceeds a specified threshold. This module is an ideal solution for projects that require safe and reliable current monitoring.
CT220BMV-HS5 supports a magnetic field range of ±1.5 mT (±15 G). It offers output sensitivity of 1500 mV/mT at 5 V supply voltage or 990 mV/mT at 3.3 V. The sensor operates at a supply voltage range of 2.7 V to 5.5 V, with a zero-output voltage of 2.5 V at 5 V supply. The actual current measurement range and sensitivity depend on the distance between the sensor and the conductor, its geometry, and orientation relative to the board. For best results, it is recommended to calibrate the sensor in the target setup, especially for varying wire diameters and insulation thicknesses.
Features
- Sensor model: Allegro CT220BMV-HS5
- Magnetic field measurement range: ±1.5 mT (±15 G)
- Sensitivity at 5 V: 1500 mV/mT
- Ratiometric analog output (centered around VDD/2)
- FLAG output active when exceeding 90% or dropping below 10% of the magnetic range
- Response time: typically 20 µs
- Bandwidth: 30 kHz (with built-in RC filter)
- Connectors: JST SH 4-pin or 0.1″ (2.54 mm) through-holes
- Supply voltage: 2.7 V to 5.5 V
- Current consumption: approx. 1.2 mA
- Operating temperature: −40 °C to 125 °C
- Dimensions: 10.2 × 15.7 × 5 mm
- Weight: 0.4 g
1199030
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±80 A
- Sposób podłączenia
- Nieinwazyjny
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł38.40
24h
Available quantity: 1
Available
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł44.72
Delivery date unknown
No product available!
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł19.90
24h
Available quantity: 9
Available
Allegro\'s TMR sensor module enables precise, non-contact current measurement without breaking the circuit. It offers high sensitivity, low power consumption, an analog output proportional to the magnetic field, and a threshold detection (FLAG) function. Its compact design, AC/DC support, and easy installation make it ideal for energy-efficient and safe current monitoring systems. Pololu 5355
zł18.77
24h
Available quantity: 3
Available
Other products in the same category (16)
Available
ACS711EX Current Sensor Carrier -15.5A to +15.5A
zł20.06
24h
Available quantity: 5
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5447
zł17.10
4 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 5A. DFRobot SEN0287
zł81.82
24h
Available quantity: 3
Available
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł12.20
24h
Available quantity: 19
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250
zł56.69
24h
Available quantity: 3
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231
zł45.45
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
zł58.79
24h
Available quantity: 2
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
24h
Available quantity: 1
Available
Compact Pololu 5294 current sensor based on the ACS37220 IC, designed for measuring currents up to ±200 A at a 5 V supply voltage in applications requiring galvanic isolation and an analog output. Pololu 5294
zł26.04
24h
Available quantity: 3
Available
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł17.92
24h
Available quantity: 2
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
3 weeks
No product available!
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.95
4 weeks
No product available!
Compact current sensor based on TMR technology, enabling precise measurements up to 30 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5317
zł52.79
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5251
zł58.78
24h
Available quantity: 2
Available
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł44.72
4 weeks
No product available!
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352