zł15.28 tax excl.
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5454
ACS37042 Micro Carrier is a compact module based on the Allegro current sensor, utilizing Hall effect technology and providing galvanic isolation for current measurement. The device features an extremely low current path resistance, minimizing power losses and ensuring high accuracy for both DC and AC current measurement. The analog output offers a wide 150 kHz bandwidth, enabling fast and precise current monitoring in dynamic systems. The sensor response time is less than 5 µs, making it ideal for applications that require quick feedback.

The module provides five essential connections: current inputs IP+ and IP-, power supply pins VDD and GND, and the signal output VOUT. The supply voltage should be connected to the VDD and GND pads marked on the back of the PCB. At the VOUT pin, the sensor outputs an analog signal with a baseline of 1.65 V, which shifts proportionally to the current flow. Positive current increases the output voltage, while negative current decreases it.
The board can be connected in the current path in multiple ways, depending on the application. In high-current scenarios, it is possible to solder 10 AWG wires directly to the mounting holes. These holes are also compatible with M3.5 mounting holes and screw terminals with a pitch of 3.5 mm or 5 mm, allowing for flexible installation in both prototypes and production systems. Alternatively, goldpin headers may be used, but they are not recommended for high-current use.

The sensor features integrated temperature compensation, ensuring high accuracy across the entire operating temperature range from -40°C to 125°C, in compliance with automotive standards. The design is non-ratiometric, meaning the zero point and sensitivity are unaffected by power supply variations, ensuring stability and noise immunity. Thanks to its small size, this module is perfect for space-constrained applications.
Manufacturer
Responsible person
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
2-pin ARK mounting strip, 3.5 mm pitch. 381-3.5-02P-14-00AH. Set of 10 pieces
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
WCS1600-100A Hall effect current sensor module designed for non-invasive DC and AC current measurement. The measurement range is ±100A DC and 70A AC RMS. Features an analog output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Powered by 5V DC, the module is suitable for load monitoring, motor control, and overload detection. WCS1600-100A
Hall effect current sensor module WCS1700-70A designed for non-invasive DC and AC current measurement. The measurement range is ±70A DC and 50A AC RMS. Features an analog output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Powered by 5V DC, the module is suitable for load monitoring, motor control, and overload detection. WCS1700-70A
WCS1800-35A Hall effect current sensor module designed to measure DC and AC current without interrupting the monitored conductor. Features an analog voltage output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Operating from a 5V supply, the module supports load monitoring in motor control circuits, power systems, and microcontroller projects. WCS1800-35A
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5246
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5454