- New
zł5.15
ACS72981LLRATR-050U5 Current Sensor - module with current sensor 0-50A, 5V
ID: 1197884
zł52.79
Tax included
zł42.92 tax excl.
The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5264
Description
The ACS72981 current sensor module is a modern solution based on the Hall effect, providing electrical isolation of the current path. This allows it to be placed anywhere in the electrical circuit, offering safe and precise measurement. The sensor features an interference-resistant design, eliminating the influence of uniform magnetic fields such as the Earth’s magnetic field. With its low conductor resistance (0.2 mΩ) and multilayer PCB (6 layers, 2 oz copper), energy losses are minimized.
The sensor provides a wideband analog output (up to 250 kHz) proportional to DC current, with a response time below 2 µs. Built-in digital temperature compensation improves measurement accuracy across a wide temperature range.
Various mounting methods make it easy to integrate the module into a circuit – you can solder wires directly to the holes, use solderless ring terminals, or attach screw terminals. The largest holes support wires up to 8 AWG and M3.5 screws, while additional 3.5 mm and 5 mm holes allow the use of screw terminals or pin headers.
The module is ideal for applications requiring precise current measurement, such as energy management systems, battery monitoring, protection circuits, and industrial electronics. Thanks to its electrical isolation, it enables safe current monitoring in high-voltage systems, while its low power consumption makes it suitable for mobile and battery-powered devices. A user-friendly interface and compact design make the sensor an excellent choice for both professionals and hobbyists. It can be used in prototyping, testing, or as a component of finished measurement systems. Its ease of integration and wide range of applications make the ACS72981 an indispensable tool in modern electronics.
Features
- Sensor: Allegro ACS72981LLRATR-050U5
- Measurement range: 0 A to 50 A
- Sensitivity: 80 mV/A
- Supply current: 14 mA
- Hall effect sensor with isolated current path
- Supply voltage range: 4.5 V to 5.5 V
- Conduction resistance: 0.2 mΩ
- Bandwidth: 250 kHz
- Response time: < 2 µs
- Analog output: voltage proportional to current
- Temperature compensation: built-in digital compensation
- Mounting options: soldered wires, ring terminals, screw terminals
- Supported wires: 8 AWG (M3.5), 12 AWG (M2)
- Dimensions: 17.78 × 20.32 mm
- Weight: 1.4 g
1197884
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 50 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł58.79
24h
Available quantity: 1
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł58.79
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
zł58.79
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł58.79
24h
Available quantity: 1
Available
Other products in the same category (16)
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034
zł17.72
24h
Available quantity: 4
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5232
zł50.34
4 weeks
No product available!
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł44.72
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5256
zł58.79
24h
Available quantity: 1
Available
ACS711EX Current Sensor Carrier -31A to +31A
zł21.50
4 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 5A. DFRobot SEN0287
zł82.52
24h
Available quantity: 3
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features an analog VOUT output with a sensitivity of 66.7 mV/A and a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5443
zł15.89
4 weeks
No product available!
Analogue current sensor module. Allows measurement of AC and DC currents up to 50 A. DFRobot SEN0098-V2
zł73.42
24h
Available quantity: 2
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł42.39
24h
Available quantity: 4
Available
Module with INA237 sensor designed for power monitoring. Allows measurement of voltages up to 85 VDC and current up to 10 A. Uses a 16-bit ADC for precise and accurate readings available via the I2C interface. Adafruit 6340
zł50.09
24h
Available quantity: 3
Available
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5296
zł46.19
24h
Available quantity: 4
Available
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł18.82
24h
Available quantity: 2
Available
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56
24h
Available quantity: 9
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5295
zł46.19
24h
Available quantity: 4
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł74.26
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5270
zł71.45
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5264