ACS37042KLHBLT-010B3 Current Sensor - module with current sensor -10A to +10A, 3.3V
ID: 1197863
5902186322257
zł17.99
Tax included
zł14.63 tax excl.
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5450
Description
ACS37042 Micro Carrier is a compact module based on the Allegro current sensor, utilizing Hall effect technology and providing galvanic isolation for measurement. The device features a very low current path resistance of ~1.6 mΩ, minimizing energy losses and ensuring high accuracy for both DC and AC current measurements. The analog output offers a wide 150 kHz bandwidth, enabling fast and precise current measurement in dynamic systems. The sensor response time is less than 5 µs, making it ideal for applications requiring rapid response.
The module has five essential pins: current inputs IP+ and IP-, logic supply VDD and GND, and signal output VOUT. Power should be connected to the VDD and GND pads marked on the bottom of the board. The VOUT output generates an analog signal with a resting voltage of 1.65 V, which changes proportionally to the input current. Positive current increases the output voltage, while negative current decreases it, with a sensitivity of 132 mV/A.
The board can be integrated into the current path in various ways depending on the application. In typical high-current applications, wires can be soldered directly to the mounting holes. These holes are also compatible with screw terminals with a 3.5 mm or 5 mm pitch, making it easy to install the module in both prototype and final setups. Alternatively, goldpin connectors can be used.
The sensor provides integrated temperature compensation, improving accuracy across the full operating temperature range of -40°C to 125°C, in compliance with automotive standards. The device is non-ratiometric, meaning its zero point and sensitivity are independent of supply voltage fluctuations, ensuring noise immunity. The module is designed to operate at 3.0 V to 3.6 V and supports a bidirectional measurement range of -10 A to +10 A. Thanks to its compact size, it is ideal for small-scale projects.
Features
- Chip: ACS37042KLHBLT-010B3
- Measurement range: ±10 A (bidirectional)
- Supply voltage: 3.0 V to 3.6 V (nominal 3.3 V)
- Sensitivity: 132 mV/A
- Zero point: 1.65 V
- Current path resistance: ~1.6 mΩ
- Bandwidth: 150 kHz
- Response time: < 5 µs
- Temperature compensation
- Operating temperature: -40°C to 125°C
- Galvanic isolation: 285 Vrms
- Dimensions: 7.6 × 10.2 mm
1197863
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±10 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 4173
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 19031
Available
2-pin ARK mounting strip, 3.5 mm pitch. 381-3.5-02P-14-00AH
Delivery date unknown
No product available!
2-pin ARK mounting strip, 3.5 mm pitch. 381-3.5-02P-14-00AH. Set of 10 pieces
zł7.23
24h
Available quantity: 7
Available
Other products in the same category (16)
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł42.14
24h
Available quantity: 2
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 9
Available
No product available!
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł63.04
24h
Available quantity: 2
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5230
zł46.06
24h
Available quantity: 6
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5453
zł17.74
6 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 10 A. DFRobot SEN0288
zł108.03
24h
Available quantity: 10
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411
zł172.30
4 weeks
No product available!
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5295
zł46.19
24h
Available quantity: 4
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł58.79
24h
Available quantity: 2
Available
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł38.40
24h
Available quantity: 1
Available
Module with INA237 sensor designed for power monitoring. Allows measurement of voltages up to 85 VDC and current up to 10 A. Uses a 16-bit ADC for precise and accurate readings available via the I2C interface. Adafruit 6340
zł49.82
24h
Available quantity: 4
Available
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł17.92
24h
Available quantity: 2
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
3 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5445
zł17.10
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262
zł58.50
24h
Available quantity: 2
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5450