ACS72981LLRATR-050B3 Current Sensor - current sensor module -50A to +50A, 3.3V
ID: 1196568
zł56.69
Tax included
zł46.09 tax excl.
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250
Description
The ACS72981 current sensor module is a modern solution based on the Hall effect, providing electrical isolation of the current path. This allows it to be placed anywhere in an electrical circuit, offering a safe and precise measurement. The sensor features a noise-resistant design, eliminating the influence of uniform magnetic fields, such as the Earth's magnetic field. Thanks to the low conduction path resistance (0.2 mΩ) and a multilayer PCB (6 layers, 2 oz copper), energy losses are minimized.
The sensor offers a wideband analog output (up to 250 kHz) proportional to the AC or DC current, with a response time of less than 2 µs. Built-in digital temperature compensation improves measurement accuracy over a wide temperature range.
Various mounting methods allow easy integration of the module into the circuit – you can solder wires directly to the holes, use no-solder ring terminals, or mount screw terminals. The largest holes support wires up to 8 AWG and M3.5 screws, with additional 3.5 mm and 5 mm holes allowing the use of screw connectors or header pins.
The module is perfect for applications requiring precise current measurement, such as energy management systems, battery monitoring, protection circuits, and industrial electronics. Thanks to its electrical isolation, it allows safe current monitoring in high-voltage systems, and its low power consumption makes it suitable for mobile applications and battery-powered devices. The user-friendly interface and compact design make the sensor an ideal choice for both professionals and hobbyists. It can be used in prototyping, testing, and as a component of ready-made measurement systems. Its easy integration and wide range of applications make the ACS72981 an indispensable tool in modern electronics.
Features
- Sensor: Allegro ACS72981LLRATR-050B3
- Measurement range: -50 A to +50 A
- Sensitivity: 26.4 mV/A
- Supply current: 14 mA
- Hall effect sensor with isolated current path
- Supply voltage range: 3V to 3.6V
- Conduction resistance: 0.2 mΩ
- Bandwidth: 250 kHz
- Response time: < 2 µs
- Analog output: voltage proportional to current
- Temperature compensation: built-in digital compensation
- Mounting options: wire soldering, ring terminals, screw terminals
- Supported wires: 8 AWG (M3.5), 12 AWG (M2)
- Dimensions: 17.78 x 20.32 mm
- Weight: 1.4g
1196568
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±50 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł53.04
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł58.79
24h
Available quantity: 2
Available
Other products in the same category (16)
No product available!
No product available!
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 21
Available
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.95
4 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł92.27
4 weeks
No product available!
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
24h
Available quantity: 1
Available
Module with INA219 system with bi-directional current meter
zł10.01
4 weeks
No product available!
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 1
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
zł64.69
24h
Available quantity: 2
Available
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł22.02
24h
Available quantity: 10
Available
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł12.20
4 weeks
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56
24h
Available quantity: 7
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł51.82
4 weeks
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł40.55
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250