- New
ACS37030LLZATR-040B3 Current Sensor Large - module with current sensor -40A to +40A, 3.3V
ID: 1199885
5902186323315
zł56.49
Tax included
zł45.93 tax excl.
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5234
Description
ACS37030 Current Sensor is an advanced current sensor module with a measurement range from -40 A to +40 A, combining Hall effect and inductive coil technologies, enabling the measurement of both DC and AC components of the current signal. This provides an exceptionally wide bandwidth of DC up to 5 MHz, allowing precise monitoring of dynamic current changes in real time. One of the key features of this module is its ultrafast response time of just 40 ns. This makes the sensor an ideal solution for applications requiring ultra-fast current change detection, such as motor control systems, power converters, protection systems, and energy monitoring. The sensor offers galvanic isolation between the current path and the measurement circuits, ensuring safety and minimizing interference. Its current-carrying path features an extremely low resistance of just 0.7 mΩ, reducing power losses and allowing efficient operation in high-current systems. Additionally, the PCB is made of high-quality copper, further enhancing its electrical properties.
The sensor output is not ratiometric, meaning its zero point and sensitivity are independent of the actual supply voltage, eliminating the influence of power line noise. The sensor output is an analog voltage proportional to the measured current. Thanks to the integrated reference output VREF, the sensor enables pseudo-differential signal transmission, significantly improving noise immunity in demanding application environments. Furthermore, the built-in digital temperature compensation ensures high measurement accuracy over a wide temperature range.
The module is designed for easy integration into various systems. It offers multiple mounting options, including standard 2.54 mm pins, screw terminals, and mounting holes, allowing quick and convenient installation in the circuit. Pin markings are printed on the PCB for easy and correct connection.
Applications of the ACS37030 sensor include a wide range of uses, such as energy management systems, battery monitoring, electric motor speed control, short-circuit detection, power converters, and protection systems. With its advanced features and flexible mounting options, this sensor is an excellent solution for professional projects requiring precise current measurement with high speed and accuracy.
Features
- Sensor type: Allegro ACS37030LLZATR-040B3
- Measurement range: from -40 A to +40 A
- Technology: Hall effect + inductive coil
- Bandwidth: DC up to 5 MHz
- Supply voltage: 3 V to 3.6 V
- Sensor sensitivity: 33 mV/A
- Conduction path resistance: 0.7 mΩ
- Fast response time: 40 ns
- Analog output proportional to current
- Non-ratiometric output voltage
- Reference output VREF for noise reduction
- Immunity to magnetic fields thanks to differential measurement
- Built-in digital temperature compensation
- Operating temperature: -40°C to 150°C
- Connection options: 2.54 mm header, screw terminals, mounting holes
- Dimensions: 30.48 x 35.56 mm
- Weight: 4 g
1199885
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±40 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł63.04
24h
Available quantity: 2
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5232
zł48.57
24h
Available quantity: 3
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5230
zł48.57
24h
Available quantity: 3
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5234
zł56.49
Delivery date unknown
No product available!
Other products in the same category (16)
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.37
24h
Available quantity: 3
Available
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł22.16
24h
Available quantity: 3
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412
zł191.44
4 weeks
No product available!
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
zł134.91
4 weeks
No product available!
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5230
zł48.57
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł58.79
24h
Available quantity: 2
Available
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034
zł17.72
24h
Available quantity: 3
Available
Precision Hall effect current sensor, providing galvanic isolation and wide 250 kHz bandwidth. Low conductive path resistance, magnetic interference immunity and ratiometric analog output make it ideal for AC and DC current monitoring applications. Pololu 5281
zł71.46
24h
Available quantity: 2
Available
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
zł18.77
4 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features an analog VOUT output with a sensitivity of 44 mV/A and a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5441
zł15.89
4 weeks
No product available!
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł39.31
24h
Available quantity: 2
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5455
zł19.13
4 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5454
zł19.13
4 weeks
No product available!
HSTS08L 10A 2.5V Current Sensor. Enables measurement of high currents. modHSTS08L
zł71.86
24h
Available quantity: 3
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł74.26
4 weeks
No product available!
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5234