ACS37030LLZATR-065B3 Current Sensor - current sensor module -65A to +65A, 3.3V
ID: 1196570
zł48.57
Tax included
zł39.49 tax excl.
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5232
Description
The ACS37030 Current Sensor is an advanced current sensor module that combines the Hall effect and an inductive coil, allowing measurement of both the DC and AC components of the current signal. This provides an exceptionally wide bandwidth of up to 5 MHz for DC signals, enabling precise real-time monitoring of dynamic current variations. One of the key features of this module is its ultra-fast response time of just 40 ns. This makes the sensor an ideal solution for applications requiring ultra-fast current change detection, such as motor control systems, power converters, protection circuits, and energy monitoring systems. The sensor provides galvanic isolation between the current path and the measurement circuits, ensuring safety and minimizing interference. Its conductive path features a low resistance of just 0.7 mΩ, reducing power losses and enabling efficient operation in high-current systems. Additionally, the PCB is made of high-quality copper, further improving its electrical properties.
The sensor output is non-ratiometric, meaning that its zero point and sensitivity are independent of the actual supply voltage, eliminating the influence of power line noise. The sensor's output signal is an analog voltage proportional to the measured current. With a built-in VREF reference output, the sensor enables pseudo-differential signal transmission, significantly improving noise immunity in challenging application environments. Additionally, the built-in digital temperature compensation ensures high measurement accuracy over a wide temperature range.
The module is designed for easy integration into various systems. It offers multiple mounting options, including standard 2.54 mm pins, screw terminals, and mounting holes, allowing for quick and convenient connection to the circuit. Pin labels are printed on the PCB to facilitate correct wiring.
The ACS37030 sensor is suitable for a wide range of applications, including energy management systems, battery monitoring, electric motor speed control, short-circuit detection, power converters, and protection systems. Thanks to its advanced parameters and flexible mounting options, this sensor is an excellent solution for professional projects requiring high-speed and high-accuracy current measurement.
Features
- Sensor type: Allegro ACS37030LLZATR-065B3
- Measurement range: -65 A to 65 A
- Technology: Hall effect + inductive coil
- Bandwidth: DC to 5 MHz
- Supply voltage: 3 V to 3.6 V
- Sensor sensitivity: 20.3 mV/A
- Conduction path resistance: 0.7 mΩ
- Fast response time: 40 ns
- Analog output proportional to current
- Non-ratiometric output voltage
- VREF reference output for noise reduction
- Magnetic field immunity due to differential measurement
- Built-in digital temperature compensation
- Operating temperature: -40°C to 150°C
- Connection options: 2.54 mm connector, screw terminals, mounting holes
- Dimensions: 20.32 x 17.78 mm
- Weight: 1.2g
1196570
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±65 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł63.04
24h
Available quantity: 2
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5230
zł46.06
24h
Available quantity: 6
Available
Other products in the same category (16)
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5446
zł17.10
4 weeks
No product available!
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 50 A. Cytron BB-ACS756
zł82.51
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł22.15
24h
Available quantity: 3
Available
INA169 current sensor module. The system can be supplied with the voltage from 2.7 V to 60 V and has an analog output. SparkFun SEN-12040
zł58.41
24h
Available quantity: 1
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411
zł172.30
4 weeks
No product available!
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
zł18.77
24h
Available quantity: 3
Available
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 2
Available
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł18.82
24h
Available quantity: 1
Available
Allegro\'s TMR sensor module enables precise, non-contact current measurement without breaking the circuit. It offers high sensitivity, low power consumption, an analog output proportional to the magnetic field, and a threshold detection (FLAG) function. Its compact design, AC/DC support, and easy installation make it ideal for energy-efficient and safe current monitoring systems. Pololu 5355
zł18.77
24h
Available quantity: 3
Available
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231
zł45.13
6 weeks
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56
24h
Available quantity: 8
Available
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł38.40
24h
Available quantity: 1
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł42.39
24h
Available quantity: 4
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5455
zł19.13
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5273
zł71.45
24h
Available quantity: 5
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5232