ACS37030LLZATR-040B3 Current Sensor - module with current sensor -40A to +40A, 3.3V
ID: 1199886
5902186323322
zł45.45
Tax included
zł36.95 tax excl.
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231
Description
ACS37030 Current Sensor is an advanced current sensor module with a measurement range from -20 A to +20 A, combining Hall effect and inductive coil technologies, enabling the measurement of both DC and AC components of the current signal. This allows for an exceptionally wide bandwidth of DC up to 5 MHz, enabling precise monitoring of dynamic current changes in real time. One of the key features of this module is its ultrafast response time of only 40 ns. This makes the sensor an ideal solution for applications requiring ultra-fast current change detection, such as motor control systems, power converters, protection systems, and energy monitoring. The sensor provides galvanic isolation between the current path and the measurement circuits, ensuring safety and minimizing interference. Its current-carrying path features an extremely low resistance of just 0.7 mΩ, reducing power losses and allowing efficient operation in high-current systems. Additionally, the PCB is made of high-quality copper, further enhancing its electrical properties.
The sensor output is not ratiometric, meaning its zero point and sensitivity are independent of the actual supply voltage, eliminating the influence of noise from the power line. The sensor output is an analog voltage proportional to the measured current. Thanks to the integrated reference output VREF, the sensor enables pseudo-differential signal transmission, significantly improving noise immunity in demanding application environments. Furthermore, the built-in digital temperature compensation ensures high measurement accuracy over a wide temperature range.
The module is designed for easy integration into various systems. It offers multiple mounting options, including standard 2.54 mm pins, screw terminals, and mounting holes, allowing quick and convenient installation in the circuit. Pin markings are printed on the PCB for easy and correct connection.
Applications of the ACS37030 sensor include a wide range of uses, such as energy management systems, battery monitoring, electric motor speed control, short-circuit detection, power converters, and protection systems. With its advanced features and flexible mounting options, this sensor is an excellent solution for professional projects requiring precise current measurement with high speed and accuracy.
Features
- Sensor type: Allegro ACS37030LLZATR-040B3
- Measurement range: from -40 A to 40 A
- Technology: Hall effect + inductive coil
- Bandwidth: DC up to 5 MHz
- Supply voltage: 3 V to 3.6 V
- Sensor sensitivity: 33 mV/A
- Conduction path resistance: 0.7 mΩ
- Fast response time: 40 ns
- Analog output proportional to current
- Non-ratiometric output voltage
- Reference output VREF for noise reduction
- Immunity to magnetic fields thanks to differential measurement
- Built-in digital temperature compensation
- Operating temperature: -40°C to 150°C
- Connection options: 2.54 mm header, screw terminals, mounting holes
- Dimensions: 20.32 x 17.78 mm
- Weight: 1.2 g
1199886
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±40 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 2044
Available
Pin header goldpin black 2x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 384
Available
Other products in the same category (16)
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5452
zł17.74
6 weeks
No product available!
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł75.92
24h
Available quantity: 1
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5246
zł21.37
24h
Available quantity: 3
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł51.82
4 weeks
No product available!
This module provides precise current, voltage, and power measurement in DC systems up to 85V and 10A. It features a 16-bit ADC, fast alarm response, and an I2C interface for easy integration with Arduino, Raspberry Pi, and CircuitPython. The module supports both high- and low-side measurement and automatic power calculation, and the STEMMA QT connector allows for quick, solderless installation. Adafruit 6349
zł55.23
24h
Available quantity: 3
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł21.37
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł58.79
24h
Available quantity: 2
Available
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
zł18.77
24h
Available quantity: 2
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412
zł191.44
4 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5445
zł17.10
24h
Available quantity: 3
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł22.15
24h
Available quantity: 3
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 28
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5270
zł71.45
24h
Available quantity: 2
Available
ACS711EX Current Sensor Carrier -31A to +31A
zł19.98
24h
Available quantity: 4
Available
A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231