The KR Sense 45A is a small voltage and current sensing board. DC current is determined by measuring the voltage drop across a parallel shunt resistor and then converted to an analogue output voltage by the INA-169. Voltage sensing is done by scaling to a 3.3 V ADC range using a precision resistor divider. It features a maximum voltage tolerance of 51.8 V at 89.4 A.
Manufacturer
Responsible person
Pololu 5328 current sensor provides electrically isolated DC current measurement in the range of 0 A to 70 A. Based on the Allegro CT432-HSWF70DR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog interface. Pololu 5328
Pololu 5333 current sensor provides electrically isolated AC and DC current measurement in the range of -50 A to +50 A. Based on the Allegro CT433-HSWF50MR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog output signal.
Pololu 5335 current sensor provides electrically isolated AC and DC current measurement in the range of -70 A to +70 A. Based on the Allegro CT433-HSWF70MR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog voltage output.
The module enables unidirectional AC and DC current measurement over a range from 0 A to 50 A. XtremeSense™ TMR technology, an electrically isolated current path, 1 MHz bandwidth, and an analogue voltage output support use in systems requiring fast current measurement and high dV/dt immunity. Pololu CT433-HSWF50DR Large Carrier 0–50 A, 3.3 V
The module enables unidirectional AC and DC current measurement over a range from 0 A to 65 A. XtremeSense™ TMR technology, an electrically isolated current path, 1 MHz bandwidth, and an analogue voltage output support use in systems requiring fast current measurement and high dV/dt immunity. Pololu CT433-HSWF65DR Large Carrier 0–65 A, 3.3 V
The INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062
HSTS08L 10A 2.5V Current Sensor. Enables measurement of high currents. modHSTS08L
No product available!
SCT010T-D 10A 5V AC Current Sensor. Enables measurement of high AC currents. modSCT010T-D
Compact current sensor based on TMR technology, enabling precise measurements up to 30 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5317
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5316
Compact current sensor based on TMR technology, enabling precise measurements up to 30 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5305
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy loss. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5304
Precision Hall effect current sensor, providing galvanic isolation and wide 250 kHz bandwidth. Low conductive path resistance, magnetic interference immunity and ratiometric analog output make it ideal for AC and DC current monitoring applications. Pololu 5281
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5261
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5251
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408