zł10,639.61
.png)
New products
New products New products
Pololu 5335 - CT433-HSWF70MR TMR Current Sensor +/-70 A 3.3 V
ID: 1194450
5902186340398
zł63.92
Tax included
zł51.97 tax excl.
Pololu 5335 current sensor provides electrically isolated AC and DC current measurement in the range of -70 A to +70 A. Based on the Allegro CT433-HSWF70MR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog voltage output.
Description
The Pololu 5335 current sensor is based on the Allegro CT433-HSWF70MR featuring XtremeSense™ TMR (Tunnel Magnetoresistance) technology, enabling accurate measurement of both AC and DC currents while maintaining electrical isolation between the current path and the measurement circuitry. The module is suitable for switch-mode power supplies, motor control systems, inverters, energy storage systems, and other applications requiring fast and precise current sensing.
The module operates from a 3.0 V to 3.6 V supply (3.3 V nominal) and provides an analog output with a sensitivity of 14.3 mV/A and a zero-current output voltage of 1.65 V. A 1 MHz bandwidth, typical response time of 300 ns, and high immunity to fast dV/dt transients make it suitable for high-speed power electronics applications. An additional FLT output indicates an overcurrent condition when the measured current exceeds the specified sensing range.
Features
- Current sensor based on the Allegro CT433-HSWF70MR
- XtremeSense™ TMR sensing technology
- Current range: -70 A to +70 A
- Bidirectional AC and DC current measurement
- Electrically isolated current sensing
- Supply voltage: 3.0 V to 3.6 V
- Nominal supply voltage: 3.3 V
- Analog voltage output
- Sensitivity: 14.3 mV/A
- Zero-current output voltage: 1.65 V
- Bandwidth: 1 MHz
- Typical response time: 300 ns
- Primary current path resistance: 1 mΩ
- FLT overcurrent fault output
- Operating temperature: -40°C to 125°C
- 6-layer PCB with 2 oz copper
- Dimensions: 30.5 × 35.6 mm
- Weight: 4.3 g
1194450
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±70 A
- Sposób podłączenia
- Szeregowy
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł91.49
24h
Available quantity: 1
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
4 weeks
No product available!
Module with INA219 system with bi-directional current meter
zł10.23
24h
Available quantity: 1
Available
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90
24h
Available quantity: 1
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
zł69.11
24h
Available quantity: 2
Available
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł23.15
24h
Available quantity: 20
Available
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł12.20
4 weeks
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł31.17
24h
Available quantity: 3
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł49.69
4 weeks
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł38.92
24h
Available quantity: 1
Available
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł18.56
24h
Available quantity: 5
Available
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034
zł17.97
24h
Available quantity: 4
Available
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 50 A. Cytron BB-ACS756
zł82.51
24h
Available quantity: 2
Available
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
zł134.91
4 weeks
No product available!
Pololu 5335 current sensor provides electrically isolated AC and DC current measurement in the range of -70 A to +70 A. Based on the Allegro CT433-HSWF70MR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog voltage output.