.png)
Pololu 5333 - CT433-HSWF50MR TMR Current Sensor +/-50A 3.3V
ID: 1194449
5902186340381
zł63.92
Tax included
zł51.97 tax excl.
Pololu 5333 current sensor provides electrically isolated AC and DC current measurement in the range of -50 A to +50 A. Based on the Allegro CT433-HSWF50MR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog output signal.
Description
The Pololu 5333 current sensor is based on the Allegro CT433-HSWF50MR featuring XtremeSense™ TMR (Tunnel Magnetoresistance) technology, enabling accurate measurement of both AC and DC currents while maintaining electrical isolation between the current path and the control electronics. The module is suitable for switch-mode power supplies, motor control systems, inverters, energy storage systems, and other applications requiring fast and precise current sensing.
The module operates from a 3.0 V to 3.6 V supply (3.3 V nominal) and provides an analog output signal with a sensitivity of 20 mV/A and a zero-current output voltage of 1.65 V. A 1 MHz bandwidth, typical response time of 300 ns, and high immunity to fast dV/dt transients make it suitable for high-speed power electronics applications. An additional FLT output indicates an overcurrent condition when the measured current exceeds the specified sensing range.
Features
- Current sensor based on the Allegro CT433-HSWF50MR
- XtremeSense™ TMR sensing technology
- Measurement range: -50 A to +50 A
- Bidirectional AC and DC current measurement
- Connection method: in series with the current path
- Interface: analog output signal
- Electrically isolated current sensing
- Supply voltage: 3.0 V to 3.6 V
- Nominal supply voltage: 3.3 V
- Sensitivity: 20 mV/A
- Zero-current output voltage: 1.65 V
- Bandwidth: 1 MHz
- Typical response time: 300 ns
- Primary current path resistance: 1 mΩ
- FLT overcurrent fault output
- Operating temperature: -40°C to 125°C
- 6-layer PCB with 2 oz copper
- Board dimensions: 30.5 × 35.6 mm
- Weight: 4.3 g
1194449
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±50 A
- Sposób podłączenia
- Szeregowy
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł40.66
24h
Available quantity: 7
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł39.10
24h
Available quantity: 2
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł88.95
24h
Available quantity: 15
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł20.25
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł19.58
4 weeks
No product available!
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
zł21.23
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł23.16
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.89
24h
Available quantity: 17
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5246
zł21.23
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.36
24h
Available quantity: 6
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł56.42
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5256
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł56.42
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5258
zł56.41
24h
Available quantity: 2
Available
Pololu 5333 current sensor provides electrically isolated AC and DC current measurement in the range of -50 A to +50 A. Based on the Allegro CT433-HSWF50MR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog output signal.