zł402.86
zł368.99
New products
New products
Regular pricezł402.86zł368.99
24h
Available
zł550.67
24h
Available
Regular pricezł402.86zł368.99
24h
Available
zł550.67
24h
Available
KR Sense Current and Voltage Sensor 45A
ID: 1183644
zł136.90
Tax included
zł111.30 tax excl.
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The KR Sense 45A is a small voltage and current sensing board. DC current is determined by measuring the voltage drop across a parallel shunt resistor and then converted to an analogue output voltage by the INA-169. Voltage sensing is done by scaling to a 3.3 V ADC range using a precision resistor divider. It features a maximum voltage tolerance of 51.8 V at 44.7 A.
Features
- Resistor divider (scaling of 13.6 V input voltage to 3.3 V output voltage)
- Maximum voltage: 51,8 V
- Maximum current: 44,7 A
- Very low zero current offset
- Analogue current output scaled for 3.3 V ADC
- No separate power supply required
- Linear performance characteristics
1183644
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 45 A
- Sposób podłączenia
- Szeregowy
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90 Delivery date unknown No product available!
Other products in the same category (16)
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5256
zł44.93 24hAvailable quantity: 2 AvailableACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł52.36 24hAvailable quantity: 2 AvailableModule with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
zł44.90 24hAvailable quantity: 2 AvailableThe INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062
zł60.79 24hAvailable quantity: 2 AvailableModule with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
zł134.91 4 weeks No product available!
ACS711EX Current Sensor Carrier -31A to +31A
zł18.88 6 weeks No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 5A. DFRobot SEN0287
zł89.19 24hAvailable quantity: 1 AvailableACS714 Current Sensor Carrier -30 to +30A
zł53.03 24hAvailable quantity: 2 AvailableThe ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł17.85 24hAvailable quantity: 3 AvailableA digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
zł49.56 24hAvailable quantity: 14 Available- Available
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł17.86 24hAvailable quantity: 3 AvailableThe current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.66 24hAvailable quantity: 11 AvailableThe ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259
zł44.93 24hAvailable quantity: 2 AvailableBidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł58.22 24hAvailable quantity: 1 AvailableModule with INA219 system with bi-directional current meter
zł10.41 6 weeks No product available!
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407