- New
zł26.70 tax excl.
Hall effect current sensor module WCS1700-70A designed for non-invasive DC and AC current measurement. The measurement range is ±70A DC and 50A AC RMS. Features an analog output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Powered by 5V DC, the module is suitable for load monitoring, motor control, and overload detection. WCS1700-70A
The WCS1700-70A Hall effect current sensor module provides non-invasive measurement of DC and AC current. The measurement range is ±70A DC and 50A AC RMS. Current is measured by passing a single conductor through the sensor's 9mm aperture, without electrically inserting the module into the current path. Hall effect measurement provides galvanic isolation between the monitored conductor and the sensor electronics.
Powered by 5V DC, the module features an analog AOUT output providing a voltage proportional to the measured current and a digital DOUT output indicating when a preset threshold is exceeded. An onboard potentiometer allows adjustment of the switching threshold, while an LED indicates threshold activation. The analog output can be connected to a microcontroller ADC input, and the digital output to a GPIO input. Applications include current consumption monitoring, motor control, overload detection, and energy management systems.
Data sheet
Manufacturer
Responsible person
WCS1600-100A Hall effect current sensor module designed for non-invasive DC and AC current measurement. The measurement range is ±100A DC and 70A AC RMS. Features an analog output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Powered by 5V DC, the module is suitable for load monitoring, motor control, and overload detection. WCS1600-100A
WCS1800-35A Hall effect current sensor module designed to measure DC and AC current without interrupting the monitored conductor. Features an analog voltage output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Operating from a 5V supply, the module supports load monitoring in motor control circuits, power systems, and microcontroller projects. WCS1800-35A
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
Module with INA219 system with bi-directional current meter
No product available!
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
No product available!
Module with ACS723 current sensor with a measuring range of AC and DC ± 5 A. It communicates via an analog interface. SparkFun SEN-13679
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
Hall effect current sensor module WCS1700-70A designed for non-invasive DC and AC current measurement. The measurement range is ±70A DC and 50A AC RMS. Features an analog output (AOUT), a digital output (DOUT), an adjustable current detection threshold, and an LED indicator. Powered by 5V DC, the module is suitable for load monitoring, motor control, and overload detection. WCS1700-70A