zł10,639.61
.png)
New products
New products New products
Pololu 5326 - CT432-HSWF50DR TMR Current Sensor 0-50A 5V
ID: 1194446
5902186339804
zł63.92
Tax included
zł51.97 tax excl.
Pololu 5326 current sensor provides electrically isolated DC current measurement in the range of 0 A to 50 A. Based on the Allegro CT432-HSWF50DR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog interface. Pololu 5326
Description
The Pololu 5326 current sensor is based on the Allegro CT432-HSWF50DR featuring XtremeSense™ TMR (Tunnel Magnetoresistance) technology, enabling accurate current measurement while maintaining electrical isolation between the current path and the control electronics. Its unidirectional measurement range of 0 A to 50 A makes the module suitable for switch-mode power supplies, inverters, energy management systems, and current monitoring applications.
The module operates from a 4.75 V to 5.5 V supply (5 V nominal) and provides an analog output with a sensitivity of 80 mV/A and a zero-current output voltage of 0.5 V. A 1 MHz bandwidth, typical response time of 300 ns, and high immunity to fast dV/dt transients make it suitable for high-speed power electronics applications. An additional FLT output indicates an overcurrent condition when the measured current exceeds the specified sensing range.
Features
- Current sensor based on the Allegro CT432-HSWF50DR
- XtremeSense™ TMR sensing technology
- Measurement range: 0 A to 50 A
- Unidirectional DC current measurement
- Connection method: in series with the current path
- Interface: analog
- Electrically isolated current sensing
- Supply voltage: 4.75 V to 5.5 V
- Nominal supply voltage: 5 V
- Sensitivity: 80 mV/A
- Zero-current output voltage: 0.5 V
- Bandwidth: 1 MHz
- Typical response time: 300 ns
- Primary current path resistance: 1 mΩ
- FLT overcurrent fault output
- Operating temperature: -40°C to 125°C
- 6-layer PCB with 2 oz copper
- Board dimensions: 30.5 × 35.6 mm
- Weight: 4.3 g
1194446
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 50 A
- Sposób podłączenia
- Szeregowy
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
zł39.56
24h
Available quantity: 6
Available
ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047
zł40.43
24h
Available quantity: 5
Available
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł39.90
24h
Available quantity: 2
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł40.66
24h
Available quantity: 7
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł39.10
24h
Available quantity: 2
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł88.90
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł20.25
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł21.13
24h
Available quantity: 4
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
zł21.23
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł23.16
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.89
24h
Available quantity: 17
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5246
zł21.23
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.36
24h
Available quantity: 4
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł56.42
24h
Available quantity: 2
Available
Pololu 5326 current sensor provides electrically isolated DC current measurement in the range of 0 A to 50 A. Based on the Allegro CT432-HSWF50DR sensor, the module utilizes TMR technology, offering a 1 MHz bandwidth and an analog interface. Pololu 5326