- New
CT433 TMR current sensor ±70A 3.3V Pololu 5315
ID: 1194441
zł51.76
Tax included
zł42.08 tax excl.
Compact current sensor Pololu 5315 based on the CT433-HSWF70MR, designed for measuring currents up to ±70 A at a 3.3 V supply in applications requiring galvanic isolation and analog voltage output. Pololu 5315
Description
Compact current sensor based on the CT433-HSWF70MR, designed for measuring AC and DC currents in the range of ±70 A at a nominal supply voltage of 3.3 V. Measurement is performed using TMR (tunneling magnetoresistance) technology in an isolated current path with very low resistance (approx. 1 mΩ), which reduces power losses and minimizes the impact of the sensor on the measured circuit.
The output signal is an analog voltage proportional to the measured current, with a zero-current output level of 1.65 V. The module features a wide bandwidth up to 1 MHz and a fast response time of approximately 300 ns, enabling monitoring of rapidly changing currents in power electronics and switching applications. The sensor includes an FLT output that indicates when the current exceeds the allowable measurement range, supporting protection and diagnostic systems.
Features
- sensing IC: CT433-HSWF70MR
- sensing technology: TMR (tunneling magnetoresistance)
- current measurement range: ±70 A
- current type: AC and DC (bidirectional)
- supply voltage: 3.0 – 3.6 V
- nominal voltage: 3.3 V
- output type: analog voltage proportional to current
- sensitivity: 14.3 mV/A
- zero-current output voltage: 1.65 V
- bandwidth: up to 1 MHz
- response time: approx. 300 ns
- primary current path resistance: approx. 1 mΩ
- measurement method: series, galvanically isolated
- FLT output (overcurrent indication)
- FLT threshold: approx. 110% of measurement range
- supply current: approx. 6 mA
- PCB: 4-layer, 2 oz copper
- signal pin pitch: 2.54 mm
- dimensions: 0.8″ × 1.1″ (approx. 20.3 × 27.9 mm)
- weight: approx. 2.3 g
- operating temperature: -40°C to +125°C
- manufacturer: Pololu
- manufacturer code: 5315
1194441
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±70 A
- Sposób podłączenia
- Szeregowy
- Dimension diagrams of the CT432/CT433 Current Sensor Carriers (425,83 kB)
- 3D model of the CT432/CT433 Current Sensor Compact Carriers (3,36 MB)
- Drill guide for the CT432/CT433 Current Sensor Compact Carriers (19,16 kB)
- CT432/CT433 TMR Current Sensor Compact Carrier basic hole dimensions. (323,00 kB)
- Schematic diagram (42,86 kB)
- CT433 datasheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł55.92
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5256
zł56.70
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł55.93
24h
Available quantity: 1
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5258
zł58.79
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259
zł52.52
24h
Available quantity: 5
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5260
zł58.79
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262
zł53.82
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5263
zł50.06
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5270
zł66.95
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5271
zł71.45
24h
Available quantity: 5
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5272
zł71.45
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5273
zł71.45
24h
Available quantity: 5
Available
Large Carrier version current sensor from Pololu, model 5274, based on the ACS72981LLRATR-100B5 IC, designed for measuring current in the range from -100 A to +100 A at a 5 V supply in applications requiring galvanic isolation and analog output. Pololu 5274
zł62.84
24h
Available quantity: 3
Available
Large Carrier version current sensor from Pololu, model 5275, based on the ACS72981LLRATR-100U3 IC, designed for measuring current in the range from 0 A to 100 A at a 3.3 V supply in applications requiring galvanic isolation and analog output. Pololu 5275
zł62.84
24h
Available quantity: 3
Available
Large Carrier version current sensor from Pololu, model 5276, based on the ACS72981LLRATR-100U5 IC, designed for measuring current in the range from 0 A to 100 A at a 5 V supply in applications requiring galvanic isolation and analog output. Pololu 5276
zł62.84
24h
Available quantity: 3
Available
Large Carrier version current sensor from Pololu, model 5277, based on the ACS72981KLRATR-150B3 IC, designed for measuring current in the range from -150 A to +150 A at a 3.3 V supply in applications requiring galvanic isolation and analog output. Pololu 5277
zł62.84
24h
Available quantity: 3
Available
Compact current sensor Pololu 5315 based on the CT433-HSWF70MR, designed for measuring currents up to ±70 A at a 3.3 V supply in applications requiring galvanic isolation and analog voltage output. Pololu 5315