List of products by brand Inny

Module with 4-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

Module with 4-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

Module with 4-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

A 20 cm long 6-pin cable with a JST XH2.5 female plug on one side

A module with an electret microphone and an amplifier that will allow you to detect a voice, a clap or a door slam using the analog output

Trapezoidal screw, length 300 mm, diameter 8 mm and pitch 2 mm, supplied with a nut. Used for drives in 3D printers

Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 4.2 A. It allows you to configure the microstep in the range from 2 to 128. DM542

The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A

Universal test probes for multimeters. The kit includes two probes (without wires) in red and black

IDC male socket, 10-pin straight, pitch 1.27 mm. Designed for mounting on printed circuit boards. RoHS

Waterproof LED indicator with a diameter of 8 mm, powered with the voltage from 9 to 12 V. Green color

Waterproof LED indicator with a diameter of 8 mm, powered with the voltage from 9 to 12 V. Blue color

BMS module for three Li-Ion cells with a voltage of 11.1 V. It has the function of charging with a balancer, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 12 A

Self-priming diaphragm pump with medium flow capacity. It is powered with the voltage of 12 V

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 8 A

Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell

Segmented LED display that allows you to display four digits consisting of 7 segments and a dot. Additionally, it can display a colon. The color of the displayed digits is red, common anode

Waterproof LED indicator with a diameter of 8 mm, powered with the voltage from 9 to 12 V. Red color

BMS module for six Li-Ion cells with a voltage of 22.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 14 A

Waterproof momentary button with a diameter of 12 mm and a height of 21 mm in a stainless steel housing. Red color